JTM45 Clapton knobs

[coldengray]

Here they are, you'll need to sand the tops to expose the aluminum.

http://www.mouser.com/ProductDetail/Eag ... /450-6017/?

[jelle]

Thanks for that. That minimum order amount is prohibitive.

[M Fowler]

http://ehcknobs.com/index.php?id=CK

[coldengray]

Thanks for that. That minimum order amount is prohibitive.

That is a new limit. I was able to order 7 or 8 a few months ago. Since I was able to secure a full set of Clapton knobs I would be happy to sell you my Wallace knobs for what I paid for them, plus the cost of the sand paper I bought to finish them. PM me if you are interested.

[sonicmojo]

I've been looking too for my '64 clone. I think 450-6016 is more the one we want as it is .87 versus 1.1 diameter and no order minimum. I think 1.1 is way too big. Anyone able to measure a real one?

Also, probably have to paint the top white with a black line. Maybe worth the effort if you really want it.....

[coldengray]

I've been looking too for my '64 clone. I think 450-6016 is more the one we want as it is .87 versus 1.1 diameter and no order minimum. I think 1.1 is way too big. Anyone able to measure a real one?

Also, probably have to paint the top white with a black line. Maybe worth the effort if you really want it.....

You are 100% correct, I realized I was wrong when someone asked me a similar question and you are correct with the size. Just hadn't gotten around to posting.

They will never be a match, but are as close as you will get for $50 and a couple of sheets of sandpaper. The other option is the real thing for $399 on eBay.

[RockinRocket]

How do the knobs on Antersons JTM1 compare ??

[coldengray]

How do the knobs on Antersons JTM1 compare ??

They are very very close if not spot on. If you know how to get them let us know!

[sonicmojo]

How do the knobs on Antersons JTM1 compare ??

They are very very close if not spot on. If you know how to get them let us know!

I think the originals protrude at the end of the black line and the Andertons do not.

[jodie]

Hi all,
I saw thes on a german site:
http://captain-koerg.de/tube-amp-servic ... mp-spares/

quite expensive, and I can´t really tell if they are spot on...
Best
Jodie

[RockinRocket]

Those are "repo buttons" The ones on the amp are original and the other photos are the repo and are off a little.

[sonicmojo]

These might be an option:

http://www.newark.com/ehc-electronic-ha ... dp/95F7000

[coldengray]

These might be an option:

http://www.newark.com/ehc-electronic-ha ... dp/95F7000

Wow, great find.

[ToneMerc]

These might be an option:

http://www.newark.com/ehc-electronic-ha ... dp/95F7000

That knob is similar to the knobs on my 45 build.

http://ampgarage.com/forum/viewtopic.php?t=11775

TM

[pdf64]

If an EU supplier is better see http://uk.farnell.com/ehc-electronic-ha ... dp/2057013