Issues with new JTM45 build

Marshall Amp Discussion

Moderators: pompeiisneaks, Colossal

sluckey
Posts: 3062
Joined: Sun Jul 22, 2007 7:48 pm
Location: Mobile, AL
Contact:

Re: Issues with new JTM45 build

Post by sluckey »

That drawing for the input jacks is not correct. Look at this pic. The two violet wires go to the 68K resistors. Green wire goes to ground.
You do not have the required permissions to view the files attached to this post.
JoeTele
Posts: 127
Joined: Sun Oct 27, 2013 2:20 pm
Location: Milwaukee, WI

Re: Issues with new JTM45 build

Post by JoeTele »

Thanks a million sluckey!!

Joe
sluckey
Posts: 3062
Joined: Sun Jul 22, 2007 7:48 pm
Location: Mobile, AL
Contact:

Re: Issues with new JTM45 build

Post by sluckey »

I forgot to mention but the speaker jacks in that drawing are incorrect also. Whoever drew those two drawings made the same mistake. The switch terminals and the tip and sleeve terminals are reversed.
JoeTele
Posts: 127
Joined: Sun Oct 27, 2013 2:20 pm
Location: Milwaukee, WI

Re: Issues with new JTM45 build

Post by JoeTele »

Thanks for confirming that.

Joe
Post Reply