50w Hot Rod Plexi AFD #39
Moderators: pompeiisneaks, Colossal
Re: 50w Hot Rod Plexi AFD #39
Thanks it does look good.
The owner sent a photo of amp on his cabinet, sweet!
Glad your enjoying your build that's great. Mark
The owner sent a photo of amp on his cabinet, sweet!
Glad your enjoying your build that's great. Mark
You do not have the required permissions to view the files attached to this post.
-
- Posts: 22
- Joined: Mon Dec 05, 2016 9:43 am
- Location: Sacramento
Re: 50w Hot Rod Plexi AFD #39
Starting my 50 Watt Hot Rod Plexi
Seems to be coming together well.
Brian Vallis
Seems to be coming together well.
Brian Vallis
Re: 50w Hot Rod Plexi AFD #39
Brian,
Looking good keep us informed, I know in your last email you were busy with life so I it's always fun to see photos of your project.
Mark
Looking good keep us informed, I know in your last email you were busy with life so I it's always fun to see photos of your project.
Mark
-
- Posts: 22
- Joined: Mon Dec 05, 2016 9:43 am
- Location: Sacramento
1 others liked this
Re: 50w Hot Rod Plexi AFD #39
A little progress
- dorrisant
- Posts: 2628
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: 50w Hot Rod Plexi AFD #39
Beautiful!!
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: 50w Hot Rod Plexi AFD #39
I liking the photos and glad your making progress.
I have one 50w HRP left for myself but might sell it as I really don't need it.
Got a local guitar/amp show March 10th so I wanted to keep it around for my wall of doom presentation.
Mark
I have one 50w HRP left for myself but might sell it as I really don't need it.
Got a local guitar/amp show March 10th so I wanted to keep it around for my wall of doom presentation.
Mark
-
- Posts: 22
- Joined: Mon Dec 05, 2016 9:43 am
- Location: Sacramento
Re: 50w Hot Rod Plexi AFD #39
I botched my board by freehanding the layout without having the Filter caps in hand.
I am having a new board built by Hoffman and I am taking off the 3-20 uF and 47 uF/500 Caps and replacing them with an interior mounted multi cap.
I'll have to do my own Visio drawing to make sure I wire it correctly.
I small set back, I'll be caught up in a few days.
BV
I am having a new board built by Hoffman and I am taking off the 3-20 uF and 47 uF/500 Caps and replacing them with an interior mounted multi cap.
I'll have to do my own Visio drawing to make sure I wire it correctly.
I small set back, I'll be caught up in a few days.
BV
Re: 50w Hot Rod Plexi AFD #39
There are a lot of new caps out there that are physically much smaller with same value.
Re: 50w Hot Rod Plexi AFD #39
Mark, what are the latest and greatest caps these days?
I'm a bit out of the loop that way.
Thanks Mark.
I'm a bit out of the loop that way.
Thanks Mark.
Yours Sincerely
Mark Abbott
Mark Abbott
Re: 50w Hot Rod Plexi AFD #39
Mark,
I use
M150's Mallory
Sozo
Mojo Dejon
ERO
New Sozo 250pf & 500pf/1000v in treble cap position and other places.
I use
M150's Mallory
Sozo
Mojo Dejon
ERO
New Sozo 250pf & 500pf/1000v in treble cap position and other places.
-
- Posts: 22
- Joined: Mon Dec 05, 2016 9:43 am
- Location: Sacramento
Re: 50w Hot Rod Plexi AFD #39
I flat out bothched my first board by being lazy. I laid out anothe board properly with all of the correct filter caps and the board came to 17", I haven't pulled the trigger on that board yet.
I am using a JTM 45 chassis so the 17 inches was too long by an inch.
I have it worked out with a muti-cap but I'm shy by 7 uF, I hope that doesn't affect the fire breathing too much.
I'll be back in the game tomorrow, Hoffman is efficient with his boards and shipping. I have a board coming with only the two 50 uF 600's on the board.
Re: 50w Hot Rod Plexi AFD #39
I use a 20" long chassis and my boards are around 19.75" so I can have lots of board room and I like the looks.
Hope you get your board stuffed and build back on track but take it slow.
Mark
Hope you get your board stuffed and build back on track but take it slow.
Mark
-
- Posts: 22
- Joined: Mon Dec 05, 2016 9:43 am
- Location: Sacramento
Re: 50w Hot Rod Plexi AFD #39
Progress Update
Starting to look like an amplifier!
I need to study the guidelines for polarity so I can get my Sozo caps aligned correctly. Missing a few parts but it is coming together well.
Does anyone have a better source for .68 Caps? The smallest ones that I found were big. I think I bought them from Antique Electronics.
Starting to look like an amplifier!
I need to study the guidelines for polarity so I can get my Sozo caps aligned correctly. Missing a few parts but it is coming together well.
Does anyone have a better source for .68 Caps? The smallest ones that I found were big. I think I bought them from Antique Electronics.
Re: 50w Hot Rod Plexi AFD #39
Does anyone have a better source for .68 Caps? The smallest ones that I found were big. I think I bought them from Antique Electronics.
[/quote]
LOL - when I saw those big yellow caps I was laughing because I used the same ones in my build and they didnt fit very well
so I used "Capacitor - 630V, Polypropylene, radial leads" from Antique electronics - they are smaller but they are red
Joe
[/quote]
LOL - when I saw those big yellow caps I was laughing because I used the same ones in my build and they didnt fit very well
so I used "Capacitor - 630V, Polypropylene, radial leads" from Antique electronics - they are smaller but they are red
Joe