Wizard MCII

[studiodunn]

Actually, this is the choke I used for the EL34 50 watters.

http://www.classictone.net/40-18032.html

The 10hy was for the MC25..

That OT is not suitable for a 6V6 pair, you need a much higher primary - more like 8k.

I assumed it would need to be 6.6k minimum, but Classictone doesn't sell a sub 40w OT with M6 steel....at least not that I've found.

[burger]

Correct.

I actually used the Classictone 8k JTM45 OT for my MC25, I alrrady had it spare.
It's worked out great for the 6V6 option.

[burger]

Updated layouts for the MCII & MTL boards are in the doco folder.

[burger]

Here's the 50w MCII.

Really happy with how it's turned out, sounds killer.

















Into a 8ohm resistive load. Pushing out easily more than 60w!

Onto the second 50w build now...