Correct PT & OT for 36w TMB?
Moderators: pompeiisneaks, Colossal
Correct PT & OT for 36w TMB?
Want to build a 36w Marshall TMB single channel combo what's PT and OT do you recommend?
4 EL84's
Mark
4 EL84's
Mark
Re: Correct PT & OT for 36w TMB?
Probably lot's of options. I'd start by looking at Hammond's AC-30 transformers.
- pompeiisneaks
- Site Admin
- Posts: 4222
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
1 others liked this
Re: Correct PT & OT for 36w TMB?
I have used hammonds with my AC30 and other builds and they seem to my limited opinion to be amazing
~Phil
tUber Nerd!
Re: Correct PT & OT for 36w TMB?
http://headfirstamplification.com
Re: Correct PT & OT for 36w TMB?
I have also used the Hammond AC30 power transformer for a 4x EL84 amp I built a while back and it worked great. I used there 290MX.
Cheers
Guy
Cheers
Guy
Re: Correct PT & OT for 36w TMB?
HEYBOER 36W
HTS-7602
290 - 0 - 290 @ 250mA
6.3VAC @ 7A FILAMENT
5VAC @ 3A RECTIFIER
HEYBOER 36W
HTS-7042-3
290 - 0 - 290 @ 250mA
6.3VAC @ 7A FILAMENT
5VAC @ 3A RECTIFIER
HTS-7602
290 - 0 - 290 @ 250mA
6.3VAC @ 7A FILAMENT
5VAC @ 3A RECTIFIER
HEYBOER 36W
HTS-7042-3
290 - 0 - 290 @ 250mA
6.3VAC @ 7A FILAMENT
5VAC @ 3A RECTIFIER
Re: Correct PT & OT for 36w TMB?
Thanks guys.
Dave I wrote down the HTS-7042-3 in my quest for 36w iron but they had used HTS-7013-1 OT.
Mark
Dave I wrote down the HTS-7042-3 in my quest for 36w iron but they had used HTS-7013-1 OT.
Mark
Re: Correct PT & OT for 36w TMB?
Dave,
I didn't notice this before but you wrote down two PT's and no recommended OT?
Mark
I didn't notice this before but you wrote down two PT's and no recommended OT?
Mark
Re: Correct PT & OT for 36w TMB?
Thanks Dave that is what I have too off the Richie Hall layout.
I tried to order but only got leave a message and no call back from Heyboer.
I tried to order but only got leave a message and no call back from Heyboer.
Re: Correct PT & OT for 36w TMB?
Sure thing Mark. You might want to email Phil or Alden directly? I was speaking to Phil just this morning and he has been getting back to me quickly.
Dave
Re: Correct PT & OT for 36w TMB?
Got a call today and order the tranny set, thanks Dave.
Re: Correct PT & OT for 36w TMB?
The PT came as a standup which surprised me but I used it anyway. Next time I better advise Heyboer I want it laydown for combo or standup for head.
Mark
Mark