Hi guys! I'm hoping someone can help me out. I performed the Headfirst mods on my DSL. Now I'm having this issue. Green channel works perfectly, but the red channel has very low volume and barely any gain. Any ideas where to start with diagnosing this problem?
Here's a video of the issue, https://youtube.com/shorts/IeZwQDqm2i0?feature=share
Here's a video of the mods, https://youtu.be/vMC_nrcwZGQ
I've also uploaded a schematic of the mods.
DSL40c issue after mod. Hoping someone can help
Moderators: pompeiisneaks, Colossal
-
Ledvedder5150
- Posts: 182
- Joined: Sat Nov 14, 2020 7:20 am
- Location: NJ
DSL40c issue after mod. Hoping someone can help
You do not have the required permissions to view the files attached to this post.
Check out my band: https://www.facebook.com/ungluedband
-
Stevem
- Posts: 4576
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
1 others liked this
Re: DSL40c issue after mod. Hoping someone can help
Did you clip parts off the board, or unsolder them?
If you unsoldered them you may have busted a circuit board trace.
A continuity test would be the way yo go first if that the case.
If you unsoldered them you may have busted a circuit board trace.
A continuity test would be the way yo go first if that the case.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!