Vox high cut control in JCM800 2204 2203

Marshall Amp Discussion

Moderators: pompeiisneaks, Colossal

pjd3
Posts: 589
Joined: Sun Nov 20, 2011 2:11 pm
Location: Reading, MA

Re: Vox high cut control in JCM800 2204 2203

Post by pjd3 »

As a matter of fact I have "stirred in some mushrooms" back in the 70's and those stirred in some nice colors but then the woods appeared to be completely ablaze all around us. Be prudent when and where you stir in some mushrooms - set, and setting.

Thanks Sluckey - I will follow the link.

PJD3
I’m only one person (most of the time)
pdf64
Posts: 2703
Joined: Sat Mar 12, 2011 9:23 pm
Location: Staffordshire, UK

Re: Vox high cut control in JCM800 2204 2203

Post by pdf64 »

pjd3 wrote: Tue Jan 24, 2023 5:32 pm
Would you expect to have a "2-pole" Vox cut control if you used a dual ganged pot and 2 capacitors? One gange into a cap, then into the 2nds gange into another cap all in series.
I think that will still be a single pole filter.
The filter circuits would need to be in cascade to get 2 poles.
User avatar
angelodp
Posts: 2048
Joined: Tue Jan 15, 2008 2:45 am
Location: L.A.

Re: Vox high cut control in JCM800 2204 2203

Post by angelodp »

Which one is you Steve? Upper left?
Post Reply