Any AA Electronics Marshall info?

[dragonbat13]

Has anybody on here built one of the marshall boards? I bought one, and plan on a 2204 build with it. But I'm having a difficult time finding actuall builds.

Ive not messed with very much marshall stuff through my life, which is a shame. So I bit the bullet on another project. Kinda looking for some ideas on exactly what goes on with this board.

There's a spot for a relay, yet it's not used in the 2204 build. So I'm wondering what options that opens up with it.

Just looking for info. Thanks.

[dcribbs1412]

You might check his website.
All layouts and schematics are available for the pcb's. You may need to login.
Most likely the relay is for channel switching or boost switching.

[dragonbat13]

After much thought, I've decided to go with a traditional turret board. Reading about the 2204 alot has informed me that there's a good chance I will be changing things around to suit my need. So I want to make modifications easier.

Probably build a tweed bassman out of the board.

Anyway. Thanks.

[dorrisant]

pm me with your email and I'll send you the zip file.

Also, if you need a 2204 turret/eyelet board, let me know.

Maybe I could trade a board for your PCB. They are pretty nice!!

[frusciante89]

Hello guys! Andrea from AA Electronics here
FYI, all information is available for free on the website (you need to register and log-in into the RESOURCES page) : https://www.aaelectronicspcb.com/

The relay provides the option of channel switching if you want to add custom mods. For the "stock" models JTM45, Plexi68, Plexi69, JCM800, 2204, 2203), there is no need to use the relay

Attaching the layouts here: