Visio Layout Symbols

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
katopan
Posts: 611
Joined: Mon Aug 22, 2011 10:10 pm
Location: Melb, Australia
Contact:
Contact katopan

Visio Layout Symbols

Post by katopan »

I was PM'd by another member regarding some amp layouts I'd done for another forum and the Visio symbols I used. I'm happy to share them not only with that person but anyone that wants them. So attached is a Visio file with some symbols I've used for a few tagstrip layouts. It's a limited set and only what I needed to build for the layouts I've done. But they are to correct scale and I individually built them (ie. not from any library). Use and abuse as you wish!
You do not have the required permissions to view the files attached to this post.
Top
Gibsonman63
Posts: 1033
Joined: Wed May 27, 2009 1:59 pm
Location: Texas

Re: Visio Layout Symbols

Post by Gibsonman63 »

Most appreciated. I guess I owe you guys some schematics now...
Top
nickds1
Posts: 1
Joined: Tue Aug 14, 2012 10:17 am

Re: Visio Layout Symbols

Post by nickds1 »

Hi - many thanks for those - very useful indeed. Glad I asked now!!

Cheers

Nick
Top
Post Reply

Return to “Technical Discussion”