I don't post here very often because I am not in the same league as you pros (though I have learned a lot by just reading past and present posts); RJ suggested that I post a couple pics of recent builds that I thought turned out fairly well. I got the PTs from RJ.
These are not wreck clones proper but utilize similar topology. Jan Marie (and Mike's Magician) are 2x ECL82 and run about 10 watts. I usually use a 12AY7 in the preamp to tone it down some but it still has much of the desirable traits--and are a gas to play. Loud but can be powered down. I have found that the ECL82 is a great little tube with a surprisingly big sound. A GZ34 rectifier for one and SS for the other; other than that they are identical. Attached is a schematic.
Jan Marie cab is paduk and maple and Mike's Magician is wormy maple.
And Jan Marie is my bride.
No response is necessary; just wanted to show another spin on a wheel reinvented. Regards.
You do not have the required permissions to view the files attached to this post.
Anything you do is everything you do. But for Pete's sake, do something.
Very nice build and interesting tube choice. I am always very interested in the use of these uncommon tubes. Would love to hear some sound clips if you get a chance. Thank you very much.
Wow--thanks for the comments guys. I freely admit I have lifted a lot of knowledge from you all to be able to build 'wreck' styled circuits with mostly success--so for this, I am sincerely grateful. This is about all I am competent to contribute to the cause at this point.
(All I do know is that the wood came out of the bin marked "Wormy Maple". Probably a generic term for 'maple violated by various beetles and worms'. )
I don't have sound clips because my Studio One software quit working but I will see if I can get something going. Regards.
dennis
Anything you do is everything you do. But for Pete's sake, do something.