Another point is relating to the Reverb Tank (064063 REVERB UNIT 4 SPRING 4AB3C1B). Any point in changing to TAD or MOD?
I seems fender uses the following
The DRRI uses an Accutronics 4-Spring tank. It is a long tank (16.75") with two sets of two springs joined in the middle.
Input Impendance: 8 ohms
Output Impedance: 2,250 ohms
Decay: Type 3 - long delay 2.75 to 4 seconds
Connectors: Input is insulated (on the tank side)
Output is grounded (on the tank side)
Locking Devices: No lock
Mounting: Horizontal - Open side down
Also, any thoughts for a better quality replacement for the RCA cable?Accutronics Tank for DRRI
Fender part number: 064063
Accutronics part number:4AB3C1B
Fender Reverb Cable for DRRI
Fender part number: 0025722000