Circuit board layout pdf
Moderators: pompeiisneaks, Colossal
Circuit board layout pdf
I don't know if this has been provided yet or not, but here is my approximation of a circuit board (not the power board) for an ODS. It includes a flipped board if you happen to have a chassis designed for tubes-up installation.
The black dots are where the eyelets go. The other holes are described in the doc. The blue grid lines are on 1/4" spacing.
It may not be *exactly* correct, but it is very close. Enjoy!
The black dots are where the eyelets go. The other holes are described in the doc. The blue grid lines are on 1/4" spacing.
It may not be *exactly* correct, but it is very close. Enjoy!
You do not have the required permissions to view the files attached to this post.
Wife: How many amps do you need?
Me: Just one more...
Me: Just one more...
Re: Circuit board layout pdf
Is it HRM on the board, or non?
Re: Circuit board layout pdf
No HRM. This emulates/approximates the Dumble board.
I may do another board that squeezes the HRM into the same board size - but it will tighten up a lot of things.
I may do another board that squeezes the HRM into the same board size - but it will tighten up a lot of things.
Wife: How many amps do you need?
Me: Just one more...
Me: Just one more...
Re: Circuit board layout pdf
I think the crammed in HRM is what people want. The Xicon MPPs are small compared to the HAD approved 6PS or PVC orange drops.
Re: Circuit board layout pdf
For this size board you're better off putting the HRM on the daughter board.
Re: Circuit board layout pdf
When I printed it out at 100% it seems to be smaller than it should be.
I chose no scaling.
Do you know what the length and width is supposed to be on these?
I chose no scaling.
Do you know what the length and width is supposed to be on these?
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Circuit board layout pdf
It is supposed to be 8" by 2.75". Each blue grid line is 1/8".
Wife: How many amps do you need?
Me: Just one more...
Me: Just one more...
Re: Circuit board layout pdf
Oh ok, yes that is what it printed out to be, I just thought it looked kind of small.
Which circuit did you base these off of?
Which circuit did you base these off of?
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Circuit board layout pdf
This is supposed to be the "standard" ODS layout - it closely mimics the board I received from Brandon when I ordered the Funk chassis.
Wife: How many amps do you need?
Me: Just one more...
Me: Just one more...
Re: Circuit board layout pdf
Thanks for that.
Is there some problem with scale on the layout I posted? I got it as close as I could to match the board I have in hand.
Is there some problem with scale on the layout I posted? I got it as close as I could to match the board I have in hand.
Wife: How many amps do you need?
Me: Just one more...
Me: Just one more...
Re: Circuit board layout pdf
I have a question on your layout you say the green holes are 1/4".
I don't see any green holes.
Also the corner holes will not leave much material around the hole.
I don't see any green holes.
Also the corner holes will not leave much material around the hole.
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Circuit board layout pdf
Hey Tom,
I just opened the file and there are 2 green holes in each pattern. Please double-check.
You can move the corner holes in as much as you like.
Michael
I just opened the file and there are 2 green holes in each pattern. Please double-check.
You can move the corner holes in as much as you like.
Michael
Wife: How many amps do you need?
Me: Just one more...
Me: Just one more...
Re: Circuit board layout pdf
Sheesh!
My eyes must be going.
But in my defense they are very faint on my monitor.
Thanx
My eyes must be going.
But in my defense they are very faint on my monitor.
Thanx
Tom
Don't let that smoke out!
Don't let that smoke out!
-
- Posts: 21
- Joined: Sun Feb 13, 2011 6:04 pm
- Location: Denver
Re: Circuit board layout pdf
Thank you mlp-mx6, this was very helpful!!!
-Tom
-Tom
It sounded so sweet... And then it caught fire!