Post p.i tone controls
Moderators: pompeiisneaks, Colossal
Post p.i tone controls
Anyone ever tried or seen a schematic for post p.i or better yet post power amp tone controls. I would like to try to control the power amp tone on my next build if possible.
Re: Post p.i tone controls
Some of the Vox 'Cut' controls qualify as post-PI tone controls.
Post Power Amp? You'd be looking at something like a http://www.tedweber.com/atten.htm Weber MASS attenuator followed by another power amp and speakers.
Hope this helps!
Post Power Amp? You'd be looking at something like a http://www.tedweber.com/atten.htm Weber MASS attenuator followed by another power amp and speakers.
Hope this helps!
- Luthierwnc
- Posts: 998
- Joined: Sat Feb 18, 2006 10:59 am
- Location: Asheville, NC
Re: Post p.i tone controls
+1 on the Vox/Matchless cut. Especially handy on pentode front-ends or EL84 rigs.
As far as after the power stage, Larry Carlton mics his speaker into a mini-PA and adds effects for the front-of-house system.
Skip
As far as after the power stage, Larry Carlton mics his speaker into a mini-PA and adds effects for the front-of-house system.
Skip