Opinions on Vox tone vs. EF86

Vox and Hiwatt Discussion

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
ViperDoc
Posts: 1247
Joined: Tue Dec 24, 2019 2:21 am
Location: Idaho

Opinions on Vox tone vs. EF86

Post by ViperDoc »

Is the EF86 preamp critical to the AC30 tone? I’m more into the single input combo design when channel mixing is off the menu. I’ve seen several top boost circuits that spec the 12AX7. Curious to know your thoughts. Thanks.
Just plug it in, man.
joeboo88
Posts: 403
Joined: Thu Mar 28, 2013 8:51 pm
Location: Way up North

Re: Opinions on Vox tone vs. EF86

Post by joeboo88 »

Hi Vipe. I built an AC30 with the normal and top boost. The normal channel for me sucked, so I put in a ef86 channel.
it’s better than the the normal channel and has good grunt, but I tend to use the top boost the most. For me the top boost channel is what I want to hear and sounds like an AC30 should?
Oh I also put in a ppmiv master and this amps seems to work well with this

Here is the schematic I used... I also used the 30H choke (Hammond)


https://ampgarage.com/forum/viewtopic.php?t=20627
User avatar
ViperDoc
Posts: 1247
Joined: Tue Dec 24, 2019 2:21 am
Location: Idaho

Re: Opinions on Vox tone vs. EF86

Post by ViperDoc »

Thanks, Joe! I've been looking at your build as one of the references. A true AC30/4 with trem and 8-10 tubes just seems like more trouble than I'm worth. I looked at the Hoffman AC30 which is a normal and top boost 12AX7-only build.

https://el34world.com/Hoffman/files/Hoffman_AC30.pdf

I like the consolidated design. Yours looks great too. I wonder how many EF86/AC15 builds there are out there? I'm still poking in the weeds.
Just plug it in, man.
User avatar
pompeiisneaks
Site Admin
Posts: 4228
Joined: Sat Jan 14, 2017 4:36 pm
Location: Washington State, USA
Contact:

Re: Opinions on Vox tone vs. EF86

Post by pompeiisneaks »

ViperDoc wrote: Mon Dec 13, 2021 10:57 pm Thanks, Joe! I've been looking at your build as one of the references. A true AC30/4 with trem and 8-10 tubes just seems like more trouble than I'm worth. I looked at the Hoffman AC30 which is a normal and top boost 12AX7-only build.

https://el34world.com/Hoffman/files/Hoffman_AC30.pdf

I like the consolidated design. Yours looks great too. I wonder how many EF86/AC15 builds there are out there? I'm still poking in the weeds.
I built an EF86 driven Vox AC30/4 and love the normal channel with EF86. The more commonly known/loved tone, though I think is the top boost version, not the older EF86 version. SOOO... up to you. I also really love the tremolo on the AC30/4.

~Phil
tUber Nerd!
User avatar
ViperDoc
Posts: 1247
Joined: Tue Dec 24, 2019 2:21 am
Location: Idaho

Re: Opinions on Vox tone vs. EF86

Post by ViperDoc »

I seem to recall the Vox trem is a harmonic version. That would be cool.
Just plug it in, man.
Post Reply