The Amp Garage

Bill: Bring the chassis to me I will make you a circuit board from 1/8" g10 that will have noval sockets mounted to it just as fender did. I have used this approach before with great success. PM me Yes I do this with my MITS board maker as well and will also use Double sided Solder flow coated PCB ...

wicker wrote:Any ideas ? Just wondering loudly...

There are a lot out there just not advertised as such

I definitely hear a difference between none, 15K and 33K. At least I think I can :lol: None sounds more strident, edgy and is more quiet when shutting down the guitar volume or not plugging in but susceptible to picking up RF depending on the grounding scheme. The capacitance of the tubes can be all...

loupy31 wrote:Hi All,
I have been thinking of trying out a pair of 6V6 tubes in my Xpress,
What is the recommended Bias setting for those tubes.

Peter

Whats your voltage on the B+ ?

Hi Guys: Not a builder, just a lurker here. I went to the NY amp show today and played a lot of amps, but the one that floored me was the Badger 35. Is this a "known" circuit that has been tweaked or something unique?? What i really liked is that is retained excellent note separation even as the ga...

We will be there with some of our amps including a single channel maple hardwood Kelley combo

http://www.studiosixdigital.com/audioto ... rator.html
[img:187:280]http://www.studiosixdigital.com/_Media/ ... 3_med.jpeg[/img]

Repeat? Dont see the original, John. I repeated what I said in February 4 posts up LOL Reverse engrave on plexi is still the most professional way to do it. Many laser shops will do it cheap if you give them full Corel artwork ready to go. Be careful on what you use as a fill though since some pain...

scandinavian amps often fused the heathers. two ac50s I saw recently both used 10A for two el34s and 4 ecc83s The problem with that is the fuses and surrounding can get VERY hot! Usually you need to use a very low resistance fuse and check for heat around the connections. No Slo Blo, Canadian Marsh...

LeftyStrat wrote:John, glad you posted, hate to hijack the thread, but can you tell me anything about the "Linear Tremolo?"

The web site looks like something from the eighties, but he claims you've install some.

Also, what is up with the BPSC?

Feel free to PM or email me.
Don't want to highjack a thread

Maybe you misunderstood me. I meant the quote must be old Since Bruton has passed. Since it is a new quote as I read more carefully maybe he was using Brutons name in past tense or didn't know he wasn't with us anymore. He was a a great guy, I did a lot of work for him when he played with Bonnie. Al...

I used to use a Boss RV-5 with my Dumbleator, then a Hardwire RV-7 which I think has a good reverb. The effect that shines on the Boss RV-5 is the modulation setting, kind of chorusy. Then I got a TC Electronics 'G Sharp' which is the lower end Delay/ Reverb from them. That really sounds good in th...

I am currently using a Boss pedal w/ or sometimes w/o the Dumbleator into a #124, but am not happy with the results. Any suggestions on a better reverb unit is appreciated. I have tried a Fender Reverb unit but line level signal easily distort and overdrive the unit. Thanks If you still want a peda...

Hi!! I'm in the middle of building a Ceriatone OTS 50 and I was wondering to build a D-lator inside the chassis using the power section of the amp... Any tips?, problems?... I read about the noise it cause if the loop is built inside... Is there a better way to do this... some Schematics? Any help ...

Did it sound heavenly? :) Apparently Robben had one in the studio. From Robben's tech Daved: "Here is an exact quote from Alexander when I mentioned the continued interest in the Angel's Breath amp to him yesterday:" ""The best thing to tell the fans about the Angel's Breath amps is that they will ...