The treble cap is a mustard, deep switch though is orange drop... will change that
Search found 221 matches
- Mon Sep 18, 2023 8:00 pm
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
Re: 102 with BM tonestack
The treble cap is a mustard, deep switch though is orange drop... will change that
- Mon Sep 18, 2023 5:50 pm
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
Re: 102 with BM tonestack
Strat - Money solo FET input preamp volume 10 bright off mid off jazz mode Treble 10 middle 4 bass 3 drive 10 volume 10 master 2 presence 7 bright off Money solo 2 normal input same settings as above 3rd clip normal same settings mid switch up 4th clip clean, same settings mid down rock down bright ...
- Sun Sep 17, 2023 1:21 pm
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
Re: 102 with BM tonestack
actually i have Mustards inside, i have some 715 in there, but much of the preamp side is mustards...
resistors are NOS made in england carbon comps
I'll try changing the 47nf in v1b to 10nf... that seems logical it would help
resistors are NOS made in england carbon comps
I'll try changing the 47nf in v1b to 10nf... that seems logical it would help
- Wed Sep 13, 2023 6:38 am
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
Re: 102 with BM tonestack
i think the LNFB is useless, overpowering low bass, i would add it in the power amp circuit, like depth control in the soldano. the dumble circuit is really finicky, but i noticed in the last few days low gain is better and then using fet as boost or a boost upfront now i just have to fix the annoyi...
- Tue Sep 12, 2023 6:56 pm
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
Re: 102 with BM tonestack
did another clip right now with LNFB off, semi hollow 335, gain trimmer set pretty low clip start as Master 1.5 then Master at around 4 then at 6 last 2 clips are FET input any improvement? I think taking the gain trimmer much lower (half) got rid of the fuzzy bass, i never run it this low usually, ...
- Tue Sep 12, 2023 6:26 pm
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
Re: 102 with BM tonestack
There seems to some buzzy tubby low midrange thing going on with the tone, interacts with the higher midrange in the 1.5-2.5k range and makes things a tad brittle. Overdrive emphasizes it apparently to my ears . HRM tends to emphasize that more aggressive frequency response imo and from others test...
- Tue Sep 12, 2023 6:15 pm
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
Re: 102 with BM tonestack
bepone, your description of the sound is excatly what i think of the sound, i've been trying for a long while to solve it...
when you mean bad lead dress you mean how the wires cross each other inside the chassis?
when you mean bad lead dress you mean how the wires cross each other inside the chassis?
- Mon Sep 11, 2023 7:10 pm
- Forum: Dumble Discussion
- Topic: 102 with BM tonestack
- Replies: 15
- Views: 11936
102 with BM tonestack
Did some recordings, one witha strat,two with a tele
Sny thoughts about the tone?
Also replaced 250pf snubbers with 47pf
Sny thoughts about the tone?
Also replaced 250pf snubbers with 47pf
- Thu Sep 07, 2023 8:45 am
- Forum: Dumble Discussion
- Topic: Hrm with cf ?
- Replies: 18
- Views: 4472
Re: Hrm with cf ?
I guess you are right
Minus the attenuator 470k and cold clipper
Hadn't thought of that...
Minus the attenuator 470k and cold clipper
Hadn't thought of that...
- Wed Sep 06, 2023 9:08 pm
- Forum: Dumble Discussion
- Topic: Hrm with cf ?
- Replies: 18
- Views: 4472
Re: Hrm with cf ?
Yeah exactly, a 2203 is a much different animal I think
- Tue Sep 05, 2023 8:12 pm
- Forum: Dumble Discussion
- Topic: Hrm with cf ?
- Replies: 18
- Views: 4472
Re: Hrm with cf ?
yeah i've seen that one, but what about keeping the 2nd OD stage the 120k 1k8/1uf or even converting it to a 100k 820 and adding a CF ?
making it kind of high gain-ish with 4 gain stages + CF
or that would be too much ?
making it kind of high gain-ish with 4 gain stages + CF
or that would be too much ?
- Tue Sep 05, 2023 10:01 am
- Forum: Dumble Discussion
- Topic: Hrm with cf ?
- Replies: 18
- Views: 4472
Hrm with cf ?
Curious as to the the ripper circuit, which sounds interesting, is it a standard dumble topology, with him tonestack and a cathode follower before the tonestack ? With one unused trident?
If not, can a hrm be built with another tube to be used as a CF before the hrm tonestack ?
If not, can a hrm be built with another tube to be used as a CF before the hrm tonestack ?
- Sun Jul 23, 2023 5:11 pm
- Forum: Dumble Discussion
- Topic: 2nd gen chassis and pcb design?
- Replies: 60
- Views: 36994
Re: 2nd gen chassis and pcb design?
is there a schematic and not a layout for the 2nd gen ? been peaking my interest since that #22 demo
- Sun Jul 16, 2023 8:29 pm
- Forum: Dumble Discussion
- Topic: 100w 2nd Gen. ODS build
- Replies: 25
- Views: 8327
Re: 100w 2nd Gen. ODS build
I would use uf4007, no real reason for 1n4007 anymore unless you want it vintage correct
- Fri Jul 14, 2023 9:22 am
- Forum: Dumble Discussion
- Topic: Dumble 22
- Replies: 0
- Views: 152976
Dumble 22
I really dislike the guy, guitars also have lots pf fret buzz, but the tone with the LP is perfect dumble I think
https://youtu.be/BjmcczaRAZ4
Would this be considered 2nd generation?
https://youtu.be/BjmcczaRAZ4
Would this be considered 2nd generation?