The Amp Garage

So all I need for my future rig setup is to find the load box I'm going to use to connect in the THRU jack of the Line Level box connected between the Poweramp Out and Speaker. These have been sugested: http://www.ebay.com/itm/8-OHM-300W-Non-Inductive-High-Power-Resistor-300-Watts-/130696698614?pt=V...

Do these ART products allow me to plug the speaker cab directly after them or do I need to have another poweramp to powerup thespeaker cab?

Didn't notice had my location wrong... I live in Santo Domingo, Dominican Republic.

What brand/model effects processor are you planning to use? I have an ADA MP-1 preamp and a Lexicon MPX-G2 for effects. 1- My idea is to run the MP-1 loop send to my tube poweramp (im using a slightly modded 5watt Epiphone Valve Jr that suprisingly sounds VERY good and loud!) for the dry sound 2- u...

The Ballzz wrote: 1 - Guitar, with wah only, into a custom built 10 watt JCM 800/2203, I call it "The Ballzz"

Interested in knowing more about that amp! PM me so this thread doesn't go out of its original intention.

El Chiguete, An old, original version H&K Red Box would be just about perfect, I'm not sure about their newer versions, lots more bells/whistles and delicate looking switches, etc. I'm currently keeping my eyes open for a reasonably priced original. For the time being, I'm using one of these for th...

Hello I would like to know if there is a line out box with thru output jack that I can use on a WDW setup. My idea for the setup is this: I want to have a line out signal from the poweramp output of the Dry tone to run in the wet stereo effects processor so it captures the color of the poweramp too ...

In another thread I got reminded of the ADA GCS-2 and GCS-3 http://www.adaamps.com/Products/ada-GCS/GCS.htm (basicly the difference is that the GCS-3 can handle speaker level signal but the balance output is only in line level and in the GCS-2 it is selectable between line level and instrument level).

Rat Valve Amp Speaker Dummy Load Box http://ratvalveamps.com/dummy-load

Anyone used this? does it suck tone? I'm looking for a dummy load with a line out without speaker cab simulation.

Rat Valve Amp Speaker Dummy Load Box http://ratvalveamps.com/dummy-load

Anyone used this? does it suck tone? I'm looking for a dummy load with a line out without speaker cab simulation.

For an average mans rig, what loadbox would you use to bring down the signal from the output of your amp to the input of an effect processor and then to a power amp?

I know that many of the Trainwreck users that don't have an FX Loop have use similar solutions to use effects after your Trainwreck.

Could a SPLITMix4 be use to independently split the signal to 4 efects and then mix it together?

I will.

Good point, I wan't sure if it would work, just wanted to ask. I want to use amps to get my cleans on overdrive tones. Actually I want to start making my own amps and a friend of mine will help me to learn all that.

I don't play live that much but I want to make a band now to play from time to time specific stuff and when I do I would like to get KILLER sound out of that rig. So on that idea the budget and size of the rig are crucial since for me (even if I had the money) it wont make sence to have a 5k rig for...