The Amp Garage

Here'S the youtube link of finished amp
Cheer
http://youtu.be/bdTPyOmkFHE

Hi guys,
I'm little in trouble, I've build a jtm 45 with mm transformers, I live in Italy where vac are 220 and not 120. My amp has a TAD 120 vac amber pilot light, which resistor (value) must be used to avoid burn the lamp?
Thank!!!!

Hi guys, Finally my amp is born! I fully agree with cruisemaster and after lot of research and your advices I decided to start building a brand new amp. I gathered all pieces and I've used shematics and layouts you posted in this thread. Sooner I will post some pictures and audio sample.

Far from your tone but not from your knowledge or culture, you are very power user! Thanks for help D

Dear dedeer, thanks for help, I've noted that additional gain stage (half 12ax7) is installed as first stage whereas in #36 it's said installed after the first dual triode. Have you got some clip or link in order to know that Duke amp?

Hy guys I'm back. After my latest build (JMP50 1987 '72) I've decided to shut down the 2210 mod project and turning on 1987 #36 mod. I made that decision after studing and viewing the schematic and layout posted above. Anybody knows how to convert my 1987? Or may be suitable rebuild the amp using br...

Ok martin, you convince me, i try to build whith 22nF 400v orange drop in phase inverter, and after all I'll try to swap with mustard 27nF. In the time I waiting I could put an order of sozo 22nf...

even if I don't use those in tone circuit but in post Phaese inverter Caps?

Hy Guys, I don't want open a new thread because I wanna talk about sozo-mustar capacitor: I've bought on ebay 4 27nF mustard capacitor to use in 1987 build. Can I use as same of 22nF? are there some important tonal change?

Why not install on rear panel, I've just open a little hole on rear in order to avoid damage original aestetic...

Hi guys, I want build a Variac in order to achieve good distortion at low level volume in my new future build JMP 50. I've try to send an e-mail to Hall amplification but no answer come back. Is there someone could help me to diy variac build. Many thanks

Please post some audio clip

I've built JTM45 with both PPIMV and after all I've decided to hold installed Lar/Mar

No dumbleator, no TC 2290, but are you really sure he has a send return cable bridge? The amp could works fine without bridge... Or may he uses time fx in not bufferd send return?

very good! I've readed somewhere about Robben in overseas tour dates uses Twin Rock Dumble clone despite USA lives where plays the original amp. And even that Robben decided to swap in two rock amp because HAD age and health problems... Anyone who knows about this?