The Amp Garage

Hello boys and girls! New PCB boards in the catalogue! 🙂🙂🙂 Trainwreck, Matchless and Marshall 18W! After your numerous requests, a new batch of PCBs is ready, with the some hot new entries! In particular: The Match: for Matchless style clones, including C30, Lighting and Spitfire The 18W: for 18W Ma...

Hello guys! Andrea here from AAElectronics
If you could let me know the mods you applied to get the Bluesmaster, I might update the board and the layout in a future version can we see some pics?
Thanks!
Cheers from London,
Andrea

Hello guys! After several requests for a Matchless-style PCB, I've created a new board that allows to build the C30, Lightning and the Spitfire versions! Taking preorders now if you're interested :) https://www.aaelectronicspcb.com/product-page/the-match https://i.ibb.co/KbzHZx5/the-match-product.pn...

Hello guys! After several requests for a 18W Marshall style PCB, I've created a new board that allows to build the 18W and the 18WTMB version! Taking preorders now if you're interested :) https://www.aaelectronicspcb.com/product-page/the-18w-marsh-style https://i.ibb.co/zn245z7/Screenshot-2023-05-12...

Hello guys! Andrea from AA Electronics here :) FYI, all information is available for free on the website (you need to register and log-in into the RESOURCES page) : https://www.aaelectronicspcb.com/ The relay provides the option of channel switching if you want to add custom mods. For the "stock" mo...

Riffmonster wrote: ↑Sun May 14, 2023 9:26 am Looks very good, great work! I see you indicated 6V6s and a PT secondary of 260v-0-260v I assume your PCB would also work with EL34s and a PT secondary of 300v-0-300v?

Yes, absolutely. You can use the power section and PT that you wish!

Hello boys and girls! As part as a new product line for my PCBs, I've decided to venture into a Trainwreck style PCB! Took me a good couple of months to get everything sorted but here's the final result! I'm planning to send this out to the manufacturer next week, and it will then available on my w...

Hello boys and girls! As part as a new product line for my PCBs, I've decided to venture into a Trainwreck style PCB! Took me a good couple of months to get everything sorted but here's the final result! I'm planning to send this out to the manufacturer next week, and it will then available on my we...

Yes, all available https://www.aaelectronicspcb.com/products

Also, the damages you showed look to me they're coming from uncoated (or very lightly coated) PCBs. In that case, the clearance is much larger than the value I mentioned of course. But mine are all coated as you can see. In any case - I'm on your side when it comes to safety factors, and that's whic...

Dear bepone, didn’t want to come out as rude. Apologise if you got that impression. In any case, I’m complying with IPC2221B standards - I work in the robotics and aerospace industry so I do have a fair bit of experience as well. The board you see in the video is the dry-run version of the final PCB...

Also, this is not based only on my experience, but on science and on the industry. There’s a specific standard that regulates this. It’s the IPC2221B, and it describes minimum trace distances for commercial PCBs. Have a look at it. I’m attaching a screenshot of it https://i.ibb.co/HxmwKJv/EC0-A24-E7...

i allready mention many times, and people repeating the same error again and again... forget about theory and first power up which will be ok. too low clearance between Ub+ and GND lines, there is never too much, also if is 1cm between the lines! here is 1 mm , 40 mills or less if i can judge from ...

Hello everyone! Your requests have been heard! I've added three brand new PCBs to my products list 🙂 SLO-style PCB (400mm x 78mm) Princeton Reverb PCB (322mm x 63.5mm) Dumblelator PCB (240mm x 35.5mm) All boards come with full documentation: layout, schematic, BOM! If you want to check out the docum...

Hello everyone! I got a lot of request for designing a Fender Princeton PCB. I got some time this weekend to design one, and I've already jotted down a layout with it. I've used Rob Robinette layouts as a starting point and the more "modern" version from Ceriatone (with standby switch, HT fuse, etc....