About the same for the power tubes. Ran wires through the tube socket. 20GA on the power tubes still leaves a little room between pins.
I wouldn't feel confident with PVC insulated wire between the socket pins. Tefzel doesn't worry me much.
Search found 4 matches
- Tue Jun 29, 2021 3:43 am
- Forum: Marshall Discussion
- Topic: Lead dress - Let's do the twist
- Replies: 24
- Views: 5352
- Sun Jun 27, 2021 5:35 am
- Forum: Marshall Discussion
- Topic: Lead dress - Let's do the twist
- Replies: 24
- Views: 5352
Re: Lead dress - Let's do the twist
Working on this one now. Getting lazy with heater wiring and didn't twist. 22 GA tefzel fits between pins 4 and 5 without getting squished. Did almost the same thing on the last build, but had a twist or two between the tubes. Worked fine. This was easier laying in the entire black wire run in first...
- Wed Jul 18, 2018 11:57 pm
- Forum: Garage Talk
- Topic: Do not order from Wattstubeaudio
- Replies: 82
- Views: 15626
Re: Do not order from Wattstubeaudio
A chassis from Watts arrived today. Ordered on May 25th. Was going to be a 50w Silver Jubilee when I ordered it. I ended up stuffing the build in a 17 inch wide chassis from Hoffman, instead of a 20in from Watts. I have about an hour left of wiring before the Jub gets powered up. I should get it don...
- Thu Jun 21, 2018 2:12 am
- Forum: Garage Talk
- Topic: Do not order from Wattstubeaudio
- Replies: 82
- Views: 15626
Re: Do not order from Wattstubeaudio
I ordered a chassis from Watts May 25th. Processing status since then. Ken hasn't responded to three emails sent, one requesting to cancel the order. Over almost two years now, I have received 6 other chassis from Ken. And other parts. Almost always there was something wrong with the order. Missing ...