The Amp Garage

Hi, here are the schematics. The Glorified OD reverb basically powers the Belton through a DC blocked voltage doubler. Please check that part of the schematic, to my eyes it seems it's missing a diode from the voltage doubler's negative part. Edit: in the Glorified OD the entire voltage doubler circ...

Yep, that's me

I'll try to post the schematics later today when I get home.

BR,
Aleksi

Hi, I've built two amps with the Belton reverb module (1st version). I think the maximum input signal level is only about 1.5V for the Belton. I'm guessing hitting the strings causes a bigger signal to be generated and the Belton doesn't handle bigger signals exactly gracefully... it will cause stra...

Hi rp, Ampmaker in the UK sells teflon wire, sometimes I get wire from there along with other parts. However, I really like the wire from www.johnswireshop.com , he sells on eBay and is located in the US. If you send him a message asking for custom colors and AWGs he'll most likely be able to get yo...

Hi xtian,

if you have a center tap on your PT's HT winding (and it's grounded), then you only need two diodes (one from each HT line to B+) and should remove those two bottom diodes (connected to GND).

So instead of
/\
\/

only

/\

BR,
Aleksi