Hi folks
I’m building a head cabinet for a Dumble style amp, hopefully to look like the Amplified Nation ones with metal trim.
Does anyone know how deep the cutout is please?
I estimate it’s set back 15mm from the front, maybe cut at 30degrees. I presume the metal trim is 20mm and the chassis mounted 25mm from the very front (10mm back from the cutout)
Thanks to anyone who could comment
Cutout depth on Amplified Nation?
Moderators: pompeiisneaks, Colossal
-
- Posts: 199
- Joined: Sat Sep 28, 2013 2:25 pm
- Location: Denmark
-
- Posts: 199
- Joined: Sat Sep 28, 2013 2:25 pm
- Location: Denmark
Re: Cutout depth on Amplified Nation?
Answering here in case anyone stumbles on this.
Found a sketch of one from AN on this thread
https://ampgarage.com/forum/viewtopic.p ... 5f1f6b3016
Mod edit: URL was wrong? removed the invalid hyphen.
Found a sketch of one from AN on this thread
https://ampgarage.com/forum/viewtopic.p ... 5f1f6b3016
Mod edit: URL was wrong? removed the invalid hyphen.