Brownface bandmaster ultraponic build
Moderators: pompeiisneaks, Colossal
Brownface bandmaster ultraponic build
5e7 brownface bandmaster new chassis off ebay.
Following Ryan Colgan build using his board set.
CTS pots and Weber rotary switch 50kRA pot.
Using new black color Belton tube sockets from CE Dist.
Moving grandpa slow here folks so roll up your walker and pull up a chair and sip on your Fresca soda pop.
Mark
Following Ryan Colgan build using his board set.
CTS pots and Weber rotary switch 50kRA pot.
Using new black color Belton tube sockets from CE Dist.
Moving grandpa slow here folks so roll up your walker and pull up a chair and sip on your Fresca soda pop.
Mark
You do not have the required permissions to view the files attached to this post.
Re: Brownface bandmaster ultraponic build
Love those brown face fender faceplates!
Cheers
G
Cheers
G
-
- Posts: 547
- Joined: Tue Jun 06, 2017 12:20 pm
- Location: Montreal, Canada
1 others liked this
Re: Brownface bandmaster ultraponic build
Yup, talk about a sexy faceplate!
I have to have my ultraphonix high gain built a faceplate.
I must say it took me a while to fall in love with it, happened recently.
It feels to me this beast is a lot more sensitive to speaker choice.
Settled on a G12 65 and a G12 65 creamback
Love the mid bump and controled bass out of it.
It shines both on clean and OD.
I used a 100k pot on the mids to extend the clean into tweed territories.
And I messed up with the presence control (Selection between JTM45, Bassman or JCM800 heavy NFB into a switchable (on#off) presence control.
Very curious to hear about your build Mark, my popcorn is ready!
Fred.
I have to have my ultraphonix high gain built a faceplate.
I must say it took me a while to fall in love with it, happened recently.
It feels to me this beast is a lot more sensitive to speaker choice.
Settled on a G12 65 and a G12 65 creamback
Love the mid bump and controled bass out of it.
It shines both on clean and OD.
I used a 100k pot on the mids to extend the clean into tweed territories.
And I messed up with the presence control (Selection between JTM45, Bassman or JCM800 heavy NFB into a switchable (on#off) presence control.
Very curious to hear about your build Mark, my popcorn is ready!
Fred.
Re: Brownface bandmaster ultraponic build
I messed up it is not a 5e7 it is a 6g7A 50w Bandmaster non-reverb.
The chassis has 4 power tube holes so it could be used as a Twin 6g8 also.
The chassis has 4 power tube holes so it could be used as a Twin 6g8 also.
Re: Brownface bandmaster ultraponic build
Finally got back to this project today. Been way too long since I saw my messy shop.
Mark
Tried to attach photos but did not work?
Mark
Tried to attach photos but did not work?
Re: Brownface bandmaster ultraponic build
Looking good, bud!! I love the way those chassis look too.
Ryan
https://www.thetonegeek.com/
https://www.thetonegeek.com/
- pottedplant
- Posts: 103
- Joined: Wed Jul 14, 2021 10:09 am
- Location: United States
1 others liked this
Re: Brownface bandmaster ultraponic build
Frescaphonix!
Re: Brownface bandmaster ultraponic build
Finally got my photos.
I actually finished the boards but forgot to take photo.
Ultra Phonix badge laying in chassis looks great can't wait to make cab and attach.
UL bandmaster 50w combo and the perfect piled up messy work bench, my god what a shit hole!
I actually finished the boards but forgot to take photo.
Ultra Phonix badge laying in chassis looks great can't wait to make cab and attach.
UL bandmaster 50w combo and the perfect piled up messy work bench, my god what a shit hole!
You do not have the required permissions to view the files attached to this post.
Re: Brownface bandmaster ultraponic build
More photos not much work done.
You do not have the required permissions to view the files attached to this post.
Re: Brownface bandmaster ultraponic build
Looking good!! I drilled holes in the octal tube covers and added bias test points in there. Something to think about!
Ryan
https://www.thetonegeek.com/
https://www.thetonegeek.com/