Hey guys,
Another Tweedle Dee build is on the way!
I want to assemble :
- a single bright channel
- with cathode bypass and NFB as provided on Rob Robinette's website (I love this feature that really extends the palette of the 5E3);
- Dumble PI cathodine (with Lar Mar type II Master Volume and 470k grid stopper) ;
- Tremolo ala Fender 1164 (but one triode only)
- adding a bias supply ala Princetone;
Here is the Schematic I put together:
Let me know if you see any error, I should start my build next week, turning an old Symphonic Electronic Corp tube amp into a rock machine !
Thanks again
- to Charlie Winston for providing the schematic of the Tweedle Dee,
- to Rob Robinette for the many explorations and tweaks provided on his website,
- to this great community sharing generously its time and knowledge with fellow apprentice like me !
Fred;
TWEEDLE DEE SINGLE CHANNEL + TREMOLO
Moderators: pompeiisneaks, Colossal
-
- Posts: 547
- Joined: Tue Jun 06, 2017 12:20 pm
- Location: Montreal, Canada
1 others liked this
TWEEDLE DEE SINGLE CHANNEL + TREMOLO
You do not have the required permissions to view the files attached to this post.
-
- Posts: 547
- Joined: Tue Jun 06, 2017 12:20 pm
- Location: Montreal, Canada
1 others liked this
Re: TWEEDLE DEE SINGLE CHANNEL + TREMOLO
Here are a few pics of the donor Symphonic amp.
Originally a stereo tube amplifier with single ended 6V6s, tube rectifier, two 12AX7 and a third smaller tube for tremolo.
Probably 2 x 5 watts output judging the size of the small OT.
3 inputs and a pair of RCA jacks as speakers outputs.
I plan on reusing the PT, tube rectifier and 6V6s into a push pull configuration with a single 5E3 Hammond replacement output transformer.
The tube layout gave me a little headache with organizing the components layout. And after a few iterations I have settled on a SSS style For the preamp.
Originally a stereo tube amplifier with single ended 6V6s, tube rectifier, two 12AX7 and a third smaller tube for tremolo.
Probably 2 x 5 watts output judging the size of the small OT.
3 inputs and a pair of RCA jacks as speakers outputs.
I plan on reusing the PT, tube rectifier and 6V6s into a push pull configuration with a single 5E3 Hammond replacement output transformer.
The tube layout gave me a little headache with organizing the components layout. And after a few iterations I have settled on a SSS style For the preamp.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 547
- Joined: Tue Jun 06, 2017 12:20 pm
- Location: Montreal, Canada
Re: TWEEDLE DEE SINGLE CHANNEL + TREMOLO
Been moving slowly but got to get together the preamp board
And finishing the heaters as the donor would not leave me many options
Ran out of eyelets for the power amp board, order is on the way Cheers;
Fred
And finishing the heaters as the donor would not leave me many options
Ran out of eyelets for the power amp board, order is on the way Cheers;
Fred
You do not have the required permissions to view the files attached to this post.