D'lite 44 BOM?

[lord preset]

Resistors, Dale (now Vishay/Dale) brand, metal film.

Thanks!

[lord preset]

Another few dummy questions:

1. Due to my hamfisted wiring technique I managed to break off the soldering tab for Pin 1 of one of the octal sockets. It was supposed to be tied to Pin 8 then to a bias test point. But since Pin 1 is not present in 6L6GCs is this connection really needed? From what I have read it would potentially matter if you wanted to run EL34s (which I don't plan to do), but not for 6L6GCs. I can of course just order another socket if it does matter but I am impatient and cheap

2. On the Dlite Tweaked Layout, the relay board has what appears to be a jumpered connection between pins 6 and 9 on on of the relays. Is that correct? Or is it just an under board connection to pin 6?

http://ampgarage.com/forum/download/file.php?id=29707

[Roe]

Tonemerc posted on Brown Note Forum some good info for the 44:

D'Lite44 Transformer SetTransformer set for the D'LITE 44. New for 2008.
Power Transformers Specs: 100v, 120v, 200v, 220v, 230v/240v Primary

325 V secondary taps @300 mA, center tapped (325v-0-50v-325v)

6.3V center tapped @ 7A (3.15v-0-3.15v)

5V & 6.3V @ 3 A (5v-6.3v-0)

50V bias tap

center-tapped heater winding and hum shield.

2-1/2" x 3-1/8" mounting centers.

----------------------------------------------------------

Got one on my bench. All voltages are 15-16% too high. Apparently, the 200v primary is connected to 230v wall voltage. I need to find the 230v/240v primary - any idea of the color codes of PT and OT?

[alnight]

Does this help? It's not quite the same transformer but could maybe help find the way.

[Roe]

Does this help? It's not quite the same transformer but could maybe help find the way.

Thanks but this one seems different, with one primary winding. I rewired it and voltages are now ok