Here is a video I did on the Reverb A Loop. There is enough technical information at the beginning to hopefully qualify for the forum.
If not the mods are welcome to remove the post.
But it should give you some ideas on how to expand your amps and take them to the next level.
Gary
http://youtu.be/905Lpi6zdUM
D-Lator with verb....
Moderators: pompeiisneaks, Colossal
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
D-Lator with verb....
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Re: D-Lator with verb....
Fine with me..... Maybe post the block here.
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: D-Lator with verb....
glasman wrote:Here is a video I did on the Reverb A Loop. There is enough technical information at the beginning to hopefully qualify for the forum.
If not the mods are welcome to remove the post.
But it should give you some ideas on how to expand your amps and take them to the next level.
Gary
http://youtu.be/905Lpi6zdUM
Block diagram
You do not have the required permissions to view the files attached to this post.
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com