Band stuff tomorrow, so Wednesday is my next opportunity to tinker. I will check the coupling cap on the reverb recovery stage.
BTW I am running 12AT7s for the reverb driver and PI just like the schematic.
Reverb Thumping
Moderators: pompeiisneaks, Colossal
-
- Posts: 12
- Joined: Tue Sep 08, 2009 8:26 am
Re: Reverb Thumping
It may not be the problem but Id also check for my pet Fender hate: the fiber board being conductive . Many years ago my 71 Super Reverb drove me crazy with this. Ive also had the misfortune recently to find even a new replacement board having the same problem, particularly during hot humid weather.
Re: Reverb Thumping
Here is the suspect.
You do not have the required permissions to view the files attached to this post.
Tom
Don't let that smoke out!
Don't let that smoke out!
-
- Posts: 1033
- Joined: Wed May 27, 2009 1:59 pm
- Location: Texas
Re: Reverb Thumping
Actually, that's my "before" picture, but it seems like I had something funny going on there, though when I repopulated the board. I have plenty of resistors, but it always seems like I have to scrounge for capacitors.
-
- Posts: 1033
- Joined: Wed May 27, 2009 1:59 pm
- Location: Texas
Re: Reverb Thumping
Firestorm was correct. No more thumping. This amp sounds great with a Strat plugged straight in.
Thanks again guys.
Thanks again guys.