Metroamp Pot Size...

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
Deric
Posts: 775
Joined: Sun Jan 14, 2007 2:56 am

Metroamp Pot Size...

Post by Deric »

Anybody here know what size the bushing is (8mm or 3/8") on the Metro kits?

Thanks
Deric®
Top
myfoot
Posts: 36
Joined: Tue Mar 25, 2008 8:19 pm

Re: Metroamp Pot Size...

Post by myfoot »

Pretty sure it's 3/8
Top
User avatar
ToneMerc
Posts: 3480
Joined: Sun Apr 26, 2009 3:55 pm
Location: East Coast

Re: Metroamp Pot Size...

Post by ToneMerc »

I've run into two different sizes. My Metro JTM45 chassis, 3/8" (PEC) control pots dropped in easily. Now the 69 100W chassis, the control holes were undersized. I just verified a Metro 100W 69 chassis, the control holes are .365(M10) and the input holes are .433 (M12).

TM
Last edited by ToneMerc on Thu Feb 24, 2011 3:33 pm, edited 2 times in total.
Top
User avatar
Deric
Posts: 775
Joined: Sun Jan 14, 2007 2:56 am

Re: Metroamp Pot Size...

Post by Deric »

Thanks for the info !!!!

8)
Deric®
Top
User avatar
Deric
Posts: 775
Joined: Sun Jan 14, 2007 2:56 am

Re: Metroamp Pot Size...

Post by Deric »

The pot in the LarMar kit is 8mm.......
Deric®
Top
Post Reply

Return to “Technical Discussion”