I'm trying to make a 1ML pot a 100kA pot by way of using tapering resistors found here: http://www.diystompboxes.com/analogalchemy/emh/emh.html
I tried the values for the 20% taper and it flat out doesn't work. I don't really even need the pot to be a pot; just a variable resistor with a log taper to it.
Any ideas or am I just missing something?
The reason why I'm trying to get this to work is because I have a Dual Gang 1ML pot that I need one section to be 100kA and the other to be 500kA
100kA from 1M Linear Pot
Moderators: pompeiisneaks, Colossal
Re: 100kA from 1M Linear Pot
Some good info here about modifying pots.
You do not have the required permissions to view the files attached to this post.
Re: 100kA from 1M Linear Pot
I can't see that your goal is possible.
The pot mods are in regard of their voltage output.
The impact of the mods on the use of the pots as variable resistors is different.
I think your best way forward would be to swap the pot tracks for the values you want, using donor pots of an identical type.
Pete
The pot mods are in regard of their voltage output.
The impact of the mods on the use of the pots as variable resistors is different.
I think your best way forward would be to swap the pot tracks for the values you want, using donor pots of an identical type.
Pete
My band:- http://www.youtube.com/user/RedwingBand
-
- Posts: 4625
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: 100kA from 1M Linear Pot
Ditto, swap pot faces !
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
-
- Posts: 69
- Joined: Tue Jul 26, 2005 9:55 am
Re: 100kA from 1M Linear Pot
Well shoot. I hate that but I do appreciate your effort in helping shed some light on the issue. All the best!pdf64 wrote:I can't see that your goal is possible.
The pot mods are in regard of their voltage output.
The impact of the mods on the use of the pots as variable resistors is different.
I think your best way forward would be to swap the pot tracks for the values you want, using donor pots of an identical type.
Pete
Re: 100kA from 1M Linear Pot
(deleted)