Hi everyone,
Sorry for the trivial question but to use 4 x 6V6 as power tubes instead of 4 x 6L6 as well as the different output transformer which other components will I have to change to exploit the tubes in the best way?
a Hug, Franco
Dorrisant's answer was:The power transformer, power tubes input grid resistors and dropping string resistors
I obviously have a limited knowledge of electronics, even if not very low, and I replied:
Thanks Dorisant,
The Power transformer obviously suitable for powering the 6V6s, the output transformer suitable for the Raa impedance of the two or four tubes, but for the input grid resistors and dropping string resistors what are the values suitable for these tubes.
In which discussion on TAG can I find a comprehensive answer on the subject? I built a Dumble 2nd generation clone with 4x 6V6 with a VOX AC30 output transformer that sounds really good (thanks to erwin_ve and rootz) but I wish I could say it's not just luck but a good build
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Thanks, Franco