SIR #36 Cap question
Moderators: pompeiisneaks, Colossal
SIR #36 Cap question
I'm modding a 2204 clone to #36 and I have a question about this 16u cap. I only see the cap in this layout, but not the schematics. What does it do and if its a good idea to include this, do you think 10u or 22uf in place of 16u would do fine? I don't have a 16u
You do not have the required permissions to view the files attached to this post.
Re: SIR #36 Cap question
yes a hi-gain amp needs proper filtering indeed. 10-22uf is fine really.
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
-
Stevem
- Posts: 4984
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
3 others liked this
Re: SIR #36 Cap question
A good rule of thumb for a high gain amp is to not have any more then two gain stages powered off of just one filter node.
Use the 22 uf .
Use the 22 uf .
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: SIR #36 Cap question
Thank you both!
Re: SIR #36 Cap question
One last question. What would the minimum voltage rating for this cap? I just realized that the one I have is 25v
Re: SIR #36 Cap question
Thank you! I ended up finding a 16u 500 F&T in my stash. Larger than I planned for but I found a nice spot on the side chassis wall.