I’m looking to get a Marshall script logo for my 18w head build (has a plexi pre-amp), the head cabinet is a british style head basically the same as the Mojo British small head:
https://www.mojotone.com/Cabinets_x/Cab ... ad-Cabinet
What size logo do I get? 6 inch?
And what’s the best way to attach it? Got glue?
Marshall script logo size for small head cab question
Moderators: pompeiisneaks, Colossal
-
- Posts: 42
- Joined: Mon Feb 10, 2020 3:13 am
-
- Posts: 34
- Joined: Tue Aug 21, 2018 12:07 am
- Location: All Points In-Between...
Re: Marshall script logo size for small head cab question
6 in. will be fine... It attaches with pins on the backside(molded in to emblem) you center it (look at photo's first) then drill 1/8" holes and just hammer it in with a small rubber faced hammer until it's flush with cabinet..
-
- Posts: 437
- Joined: Wed Jan 23, 2019 3:11 am
- Location: Leesburg Georgia
- Contact:
Re: Marshall script logo size for small head cab question
You’re about to have a lot of fun. The pins on the back of the logo are everything but evenly spaced and inline. I have a template I made and it’s fabulous for drilling the holes. Just wait until you receive the emblem.