bud chassis run
Moderators: pompeiisneaks, Colossal
bud chassis run
Over the last 3 years i've contacted bud industries about a dozen times with the same question. "can you make a custom order run of the bud AC-425 chassis?" Today i recieved what i think is some exciting news! Bud Industries is willing to make the bud AC-425 chassis as a special order run. The minimum is 50 pieces at $27 each plus freight and quoted a 4-6 week production time from the time the order is placed and payment is made in full. I personally only need 4, but if enough people are interested i'd be happy to place an order.
My Daughter Build Stone Henge
- RJ Guitars
- Posts: 2662
- Joined: Tue Nov 14, 2006 3:49 am
- Location: Los Alamos, New Mexico
- Contact:
Re: bud chassis run
I'd take a couple... lemme know
Good, Fast, or Cheap -- Pick two...
http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
http://www.rjguitars.net
http://www.rjaudioresearch.com/
http://diyguitaramps.prophpbb.com/
Re: bud chassis run
Crap. I've got a big move and I'm not supposed to be accumulating stuff. Crap.
-
- Posts: 2629
- Joined: Wed Dec 30, 2009 7:32 am
- Location: Austin
- Contact:
Re: bud chassis run
Same here, I'm moving twice in three months.. I can't pay for one until at least next month is my only issue but I may be interested in a few.
Cliff Schecht - Circuit P.I.
-
- Posts: 477
- Joined: Thu Aug 28, 2008 5:34 pm
- Location: Leeds, UK
Re: bud chassis run
i'll have two please.. if you don't mind shipping to the uk..
Re: bud chassis run
I would be up for 4. Do they come with the bottom plate?
Re: bud chassis run
one for me
Re: bud chassis run
Four to play with please
Re: bud chassis run
I was gonna ask about getting the right KF bottom plate. What was the deal with that?UR12 wrote:Do they come with the bottom plate?
(Will to resist pack-ratting parts dropping . . . )
Re: bud chassis run
The bottom plate that Ken used had 4 dimples (Feet if you will) that actually stood the chassis up off the bottom of the cab about 1/8 of an inch.Bear wrote:I was gonna ask about getting the right KF bottom plate. What was the deal with that?UR12 wrote:Do they come with the bottom plate?
(Will to resist pack-ratting parts dropping . . . )
Re: bud chassis run
I thought the Hammond bottom plate worked for that and that is what I used on one and built the bottom plates myself for the others.
Re: bud chassis run
So are you saying the bottom plates are still available from hammond?M Fowler wrote:I thought the Hammond bottom plate worked for that and that is what I used on one and built the bottom plates myself for the others.
Re: bud chassis run
Pretty sure the BUD bottom plates are still available from mouser, part number 563-BPA-1520
Re: bud chassis run
AC-425 chassis????
Pardon my igrance
Stew
Pardon my igrance
Stew