Thanks.
Are you saying SLO clone forums is still up and running?
If yes why does it reject my login after only 1 attempt it says I have exceed my attempts. Never did like that forum it was always hard to log in.
Mark
SLO build
Moderators: pompeiisneaks, Colossal
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: SLO build
Yes
still up and running
if you haven't already
maybe try the forgot password link?
or resend activation link?
D
still up and running
if you haven't already
maybe try the forgot password link?
or resend activation link?
D
Re: SLO build
Yes, sloclone is running, but we are facing some issues with russian spammers and many IPs and email providers have been blocked for safety reasons. Even I, when I travel to certain countries, I'm not allowed to login.
The Warren Hayden mod, called sometimes "gravy" because it removes the shelving on the highs at low gain settings (basically, the bright cap). Pay attention, the schematic on C3 site is wrong.
Yes, I can confirm my quote on the SRV mod.
Also, I would lower both the 1 MOhm resistors and the 1 nF cap, not to cut too many mids.
About the modmodmod thread, it has some really good hints and mods, and some IMO too much extreme schematics.
The Warren Hayden mod, called sometimes "gravy" because it removes the shelving on the highs at low gain settings (basically, the bright cap). Pay attention, the schematic on C3 site is wrong.
Yes, I can confirm my quote on the SRV mod.
Also, I would lower both the 1 MOhm resistors and the 1 nF cap, not to cut too many mids.
About the modmodmod thread, it has some really good hints and mods, and some IMO too much extreme schematics.
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: SLO build
Thanks for the info Roberto
Agreed that at its core the SLO design is a great circuit
Small adjustments here and there can enhance, but built right....stock without any mods is outstanding.
Appreciate your time
D
Re: SLO build
Thanks for all the information guys.
Mark
Mark
Re: SLO build
This is my SLO...
https://www.instagram.com/p/CvG3lIdywOv/?img_index=1
I used my own boards, faceplates, chassis, wound my own OT, etc
onboard metro fx loop, relays, no channel bleed also!
Even created a layout for it here
https://siriusamplification.com.au/wp-c ... Layout.pdf
https://www.instagram.com/p/CvG3lIdywOv/?img_index=1
I used my own boards, faceplates, chassis, wound my own OT, etc
onboard metro fx loop, relays, no channel bleed also!
Even created a layout for it here
https://siriusamplification.com.au/wp-c ... Layout.pdf
Alex Catlow
https://siriusamplification.com.au
Melbourne, Australia
https://siriusamplification.com.au
Melbourne, Australia