I wired it up "normally", so to speak, with the choke(ok not really.....a 330r 5W resistor) in between the plates and screens, and added screen resistors
Of course a lot of these early tweeds had the choke before the plates, with the choke bearing the full current draw of the tubes. The screen supply is also connect to the OT centertap/plate supply.
I went to buy a choke big enough to handle the job, and they're like $50! My curiosity dwindled pretty quickly, but if I were to implement the supply just like the schematic, what can I expect different in feel or tone?
Also of note, I'm using GZ34 for less drop, and my voltages are pretty much spot on w/ Leo's. Also using a 12ax7 in V2, as I could only find one 12ay7 around here.
Also taking speaker recommendations....The box I have for the chassis has a 12" baffle so I'll go with that....already have a 15" combo anyways
![Wink ;)](./images/smilies/icon_wink.gif)
I'm feeling like an alnico is warranted here...looking at the Fat Jimmy A1260 and Celestion Cream Alnico. Thanks!