Been thinking about building a JMP and have been looking at a bunch of schematics. I've noticed pretty much two tone stacks used with the various JMP, JTM, Super Lead, and Super Bass.
Wondering if anyone has done this? A switch to go between the two tone stacks.
Switch between JTM/JMP tone stack
Moderators: pompeiisneaks, Colossal
- randalp3000
- Posts: 667
- Joined: Mon Jan 09, 2012 11:11 pm
- Location: Holland Michigan
- Contact:
Switch between JTM/JMP tone stack
You do not have the required permissions to view the files attached to this post.
Re: Switch between JTM/JMP tone stack
yes, this has been covered at the metro forum
www.myspace.com/20bonesband
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
www.myspace.com/prostitutes
Express, Comet 60, Jtm45, jtm50, jmp50, 6g6b, vibroverb, champster, alessandro rottweiler
4x12" w/H75s
- Reeltarded
- Posts: 9973
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Switch between JTM/JMP tone stack
Even better I use variable slope and a switch for 250/566p.
33-83k slope and a little gain control gets you everything from thumpy chunk to gnarly Bandmaster. Add NFB defeat for Vox thing.
Worthy!
33-83k slope and a little gain control gets you everything from thumpy chunk to gnarly Bandmaster. Add NFB defeat for Vox thing.
Worthy!
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: Switch between JTM/JMP tone stack
You could do this as Reeltarded suggests with either a manual switch or via relays to completely isolate and switch between two independent tone stacks.randalp3000 wrote:Been thinking about building a JMP and have been looking at a bunch of schematics. I've noticed pretty much two tone stacks used with the various JMP, JTM, Super Lead, and Super Bass.
Wondering if anyone has done this? A switch to go between the two tone stacks.
I love JTM crunch!