The Amp Garage

Hi Chaps I seem to be getting noise when i change the brightness switch, its ok in middle position, but get crackling and noise when i switch to the other position. Moving the wire which goes from middle contact on volume pot to contact 2 on the V1 seems to have got rid of some noise. I wondering wh...

Cheers Andy

Your helps very much appreciated

Thanks Ben

I wonder if you can help a little bit. I've recieved my parts for the airbrake and the lorlin rotary switch the numbers go up anti-clockwise where on the layout there clockwise do i still attach to the numbers as in layout. And the clips for the 25ohm adjustible do i measure resistance across clip a...

Cheers mate


Ben

Being trying to find airbrake schematic. Does anyone know where i can find it

Cheers Ben

Tried a piece of aluminium plate to sheild components seems to have stopped the problem. Just building my cab now so fingers crossed it should be ok

Thanks for your suggestions i'll give a go and hopefully get it sorted

Thanks Ben

If i touch the chassis it stops. Do you think because its a high gain amp it could be sheilding problem.

Stoo its a new build

Ben

Ok i'll try all these things out and get back to ya

Thanks Guys

I'm getting a high pitched whistling sound almost unbearable. Even when i have no guitar lead plugged in. It gets even worse when i adjust the presence knob.

Any ideas of the problem chaps

Ben

Cheers guys

Ben

Just got my ceriatone trainwreck express clone. I want to change the tubes from 6v6 to el34's.
What should the bias voltage be for the 6v6 and what bias voltage for the el34.
Whats the best way to set the bias with my multimeter and which scale do i set the multimeter.

Hope someone can help.

Ben

I'm making a 4 x 12 cab off the plans over @ 18.watt. With dowelled corners as long as you got a few tools like a drill and jiggie its not too hard. Hardest things the tolexing. The straight parts are easy its the corners that are tricky but with corner protectors you dont see them anyway. It works ...

Cheers guys i'm thankful fo your help.