Page 1 of 1
Vibratone Crossover
Posted: Mon Jul 23, 2018 4:05 pm
by jon
I am in the process of rebuilding the controls for my Vibratone. Originally the cabinet came with a Utah 4 ohm 10" speaker. I need help recalculating the values if the caps and inductor for an 8 ohm speaker. Additionally, I would like some suggestions on components for this.
Re: Vibratone Crossover
Posted: Mon Jul 23, 2018 10:07 pm
by Reeltarded
Check it out; I bypass everything with a speaker wire and use a Celestion 30-50W 10.
So, I suggest a wire. lol
Re: Vibratone Crossover
Posted: Mon Jul 23, 2018 11:33 pm
by jon
I've run it both ways and way prefer the sound of the crossover. But thanks for the suggestion.
Re: Vibratone Crossover
Posted: Mon Aug 06, 2018 10:17 am
by Aaron
Having just bought a Leslie 18, I've been looking at the Vibratone manual because the guy I bought it from ordered the crossover seperate as they usually only came with the 10 inch models. He stressed this to me many times during the purchase.
From what I understand the crossover looks more like a notch filter for the main amp speakers. The speaker in the Vibratone just has a 100Hz high pass filter.
Thanks,
Aaron