Lets hear some FET clips???

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

amplifiednation
Posts: 2076
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Lets hear some FET clips???

Post by amplifiednation »

Here's my 102 with the FET input, pretty wet signal with a Fuchs replay and Fush reverb into the D-lator.

Wild amount of gain.

http://www.youtube.com/watch?feature=en ... u9ZKeuzwiI

I don't think we share enough clips...I don't even know if this is how is supposed to sound!
Amplified Nation
www.amplifiednation.com
@ampnation
Max
Posts: 1552
Joined: Wed May 31, 2006 6:08 pm

Re: Lets hear some FET clips???

Post by Max »

amplifiednation wrote:I don't think we share enough clips...I don't even know if this is how is supposed to sound!
Here are some links to some FET clips I posted at TAG with detailed info concerning all the gear used (guitars, speaker cabinets etc.):

http://ampgarage.com/forum/viewtopic.ph ... 483#136483
http://ampgarage.com/forum/viewtopic.ph ... 484#136484
http://ampgarage.com/forum/viewtopic.ph ... 802#140802
http://ampgarage.com/forum/viewtopic.ph ... 972#134972
http://ampgarage.com/forum/viewtopic.ph ... 368#129368

Cheers,

Max
User avatar
Structo
Posts: 15446
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: Lets hear some FET clips???

Post by Structo »

Sounds like a Fuzz tone with that gain. :D

Just goes to show how versatile Dumble amps are.

You don't have to play or sound like Larry Carlton.

I like your Anderson tele.

I built a couple along those lines.
You do not have the required permissions to view the files attached to this post.
Tom

Don't let that smoke out!
10thTx
Posts: 1865
Joined: Sat Dec 30, 2006 1:13 am

Re: Lets hear some FET clips???

Post by 10thTx »

I like your Anderson tele. I built a couple along those lines.
I built mine too! Sides are hollow on these Tele's just no f-hole. Quilt maple over swamp ash. Flamed maple over prima vera.

That amp sounds good to me.

With respect, 10thtx
You do not have the required permissions to view the files attached to this post.
Max
Posts: 1552
Joined: Wed May 31, 2006 6:08 pm

Re: Lets hear some FET clips???

Post by Max »

These video clips of a 4th generation "classic" ODS 100W might be interesting because some parts have been recorded using the FET input and some parts using the normal input (you'll notice which input is used at the beginning and at the end of some parts and sometimes when he switches between the normal and the FET input:

http://www.youtube.com/watch?v=SNSAj6Az ... ure=relmfu
http://www.youtube.com/watch?v=-qvMwCte ... ure=relmfu

Cheers,

Max
User avatar
ic-racer
Posts: 1318
Joined: Tue Dec 18, 2007 2:24 pm

Re: Lets hear some FET clips???

Post by ic-racer »

After living with and playing my #124 replica for about 5 years now, if I knew nothing about Dumble amps and just plugged into the FET channel I'd say it was a compressor.

http://www.youtube.com/watch?v=nYzUlCZYwp0
Last edited by ic-racer on Fri Sep 28, 2012 6:07 pm, edited 1 time in total.
User avatar
boldaslove6789
Posts: 957
Joined: Mon Aug 31, 2009 5:52 pm
Location: Near Dallas, TX

Re: Lets hear some FET clips???

Post by boldaslove6789 »

Here's my Quinn 183 preamp, with the FET, PAB, and OD ON using a Dumbleator and the Power amp of a 6l6 100w Bluesmaster, Sounds like a dimed Marshall Plexi IMO:

http://www.youtube.com/watch?v=LFCpTFsr ... ature=plcp
User avatar
Structo
Posts: 15446
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: Lets hear some FET clips???

Post by Structo »

Greg are you using the camera mic to record that?

Sounds great!
Tom

Don't let that smoke out!
dcribbs1412
Posts: 1378
Joined: Wed Jun 11, 2008 6:56 pm
Location: Arizona Desert

Re: Lets hear some FET clips???

Post by dcribbs1412 »

amplifiednation wrote:Here's my 102 with the FET input, pretty wet signal with a Fuchs replay and Fush reverb into the D-lator.

Wild amount of gain.

http://www.youtube.com/watch?feature=en ... u9ZKeuzwiI

I don't think we share enough clips...I don't even know if this is how is supposed to sound!
Taylor...
definitely adds another dimension to the amp.
cant tell high you have the OD set in the clip but,
You gotta be diggin that
:)
boldaslove6789 wrote:Here's my Quinn 183 preamp, with the FET, PAB, and OD ON using a Dumbleator and the Power amp of a 6l6 100w Bluesmaster, Sounds like a dimed Marshall Plexi IMO:

http://www.youtube.com/watch?v=LFCpTFsr ... ature=plcp
+1 on the plexi sound...that is a monster pre


Really nice Teles all around guys

Darin
User avatar
boldaslove6789
Posts: 957
Joined: Mon Aug 31, 2009 5:52 pm
Location: Near Dallas, TX

Re: Lets hear some FET clips???

Post by boldaslove6789 »

Structo wrote:Greg are you using the camera mic to record that?

Sounds great!
Yeah Tom, I use a Kodak Zi8 Handheld camera for all my vids. For the Quinn Preamp vids I used a small Mackie Mixer and a SM58, about 6 feet back from the cab.

I paid like $140 for the Camera, Extra battery, Tripod, and charger on Amazon. Its 1080/720p HD capable and its one of the only only handhelds with an External Balanced Mic Input. There's a Mic Level setting on the camera to adjust the sensitivity so that it doesn't distort. I highly recommend the Zi8 for anyone that wants to do vids on a budget.

For the Quinn SDO 2nd Gen vids I just use the built in Mic. http://www.youtube.com/watch?v=kvFGgLHV ... ature=plcp
amplifiednation
Posts: 2076
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Re: Lets hear some FET clips???

Post by amplifiednation »

Awesome clips guys!!

Max some of the ones you posted with the FET on the clean channel was really cool!!

Greg you are an awesome player I love listening to your videos...and I might have to jump on that camera! I'm sick of the camera mic!

It's cool to hear that ghostly type of gain is pretty consistant!
Amplified Nation
www.amplifiednation.com
@ampnation
Max
Posts: 1552
Joined: Wed May 31, 2006 6:08 pm

Re: Lets hear some FET clips???

Post by Max »

amplifiednation wrote:Max some of the ones you posted with the FET on the clean channel was really cool!!
What clips are you referring to? I ask, because AFAIR for all these clips

http://ampgarage.com/forum/viewtopic.ph ... 483#136483
http://ampgarage.com/forum/viewtopic.ph ... 484#136484
http://ampgarage.com/forum/viewtopic.ph ... 802#140802
http://ampgarage.com/forum/viewtopic.ph ... 972#134972
http://ampgarage.com/forum/viewtopic.ph ... 368#129368

the OD channel and the FET input have been used and not the clean channel and the FET input - so AFAIR just as I wrote in the descriptions of the signal chains. AFAIR only the short intro of "6000 part 1" has been recorded using the clean channel. But AFAIR for this short intro the normal input has been used.

So perhaps you did misunderstand the descriptions of the signal chains I posted together with these clips?

Cheers,

Max
Last edited by Max on Fri Sep 28, 2012 11:18 pm, edited 1 time in total.
amplifiednation
Posts: 2076
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Re: Lets hear some FET clips???

Post by amplifiednation »

Yes the clean part of 6000 was not what I was expecting and I thought it was very nice. I haven't done much with the FET input so it was a new sound to me which I enjoyed.

Thanks for posting.
Amplified Nation
www.amplifiednation.com
@ampnation
Max
Posts: 1552
Joined: Wed May 31, 2006 6:08 pm

Re: Lets hear some FET clips???

Post by Max »

amplifiednation wrote:Yes the clean part of 6000 was not what I was expecting
Just to avoid misunderstandings:

"For the clean tone of the intro a Pearl Echo Orbit-1 has been used in front of the normal input of the ODS (clean channel)."


http://ampgarage.com/forum/viewtopic.ph ... 483#136483

Cheers,

Max
amplifiednation
Posts: 2076
Joined: Sun Dec 26, 2010 6:19 pm
Location: Boston
Contact:

Re: Lets hear some FET clips???

Post by amplifiednation »

Max wrote:
amplifiednation wrote:Yes the clean part of 6000 was not what I was expecting
Just to avoid misunderstandings:

"For the clean tone of the intro a Pearl Echo Orbit-1 has been used in front of the normal input of the ODS (clean channel)."


http://ampgarage.com/forum/viewtopic.ph ... 483#136483

Cheers,

Max
Ha, I have completely misunderstood.

Thanks for clearing that up.

I'm listening to the clips again.

Some nice funky bass lines in the elgam-collective... What does it mean it was never formed and will never split? All collaboration independently tracked?
Amplified Nation
www.amplifiednation.com
@ampnation
Post Reply