+1 on the jacks
if interested in Mouser parts
D
http://www.mouser.com/Search/ProductDet ... y502-C12AX
http://www.mouser.com/Search/ProductDet ... ey502-C11X
Debugging help, please - 6V6 ODS 102 (not a new amp)
Moderators: pompeiisneaks, Colossal
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: Debugging help, please - 6V6 ODS 102 (not a new amp)
Thanks!martin manning wrote:This: http://www.switchcraft.com/productsumma ... Parent=399
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
-
- Posts: 1391
- Joined: Tue Dec 18, 2012 5:53 pm
- Location: Texas
Re: Debugging help, please - 6V6 ODS 102 (not a new amp)
I just worked on a Bassman 70 UL thing and it was exhibiting something similar. I isolated it to the PI and changed out all 4 of the fender blue drops and problem solved
-
- Posts: 2076
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Re: Debugging help, please - 6V6 ODS 102 (not a new amp)
Anyone try the mil spec Switchcraft?
Amplified Nation
www.amplifiednation.com
@ampnation
www.amplifiednation.com
@ampnation
Re: Debugging help, please - 6V6 ODS 102 (not a new amp)
I used the Mil Spec Switchcraft jacks on my ODS builds. They've all held up very well. I'd probably just use the Cliffs in the future though if drilling a bigger hole isn't an issue.
-Aaron
-Aaron
Re: Debugging help, please - 6V6 ODS 102 (not a new amp)
Do the military Switchcraft come in long thread versions for thick faceplate type of amps?
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: Debugging help, please - 6V6 ODS 102 (not a new amp)
I wondered the same, didn't see them listed.M Fowler wrote:Do the military Switchcraft come in long thread versions for thick faceplate type of amps?
Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com