D'loop flatpaks

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
Luthierwnc
Posts: 998
Joined: Sat Feb 18, 2006 10:59 am
Location: Asheville, NC

D'loop flatpaks

Post by Luthierwnc »

Hi Guys,

I have a loop on the board using a flatpak trannie. It is fed with a 12VAC supply. As I was sketching it out, I wondered about not creating a ground loop between the main amp chassis and this. There is plenty of room to take the AC supply out of its case, bolt it in the chassis and then feed regular AC to the unit. Barring that, should there be some sort of chassis connection?

Thanks, Skip

PS, Funk, where did you get those 1U PT's? sh
User avatar
Funkalicousgroove
Posts: 2235
Joined: Mon Jul 25, 2005 8:04 pm
Location: Denver, CO
Contact:

Re: D'loop flatpaks

Post by Funkalicousgroove »

I have them custom made, I can get you one if you want. Did you see the pics I posted of the Real Dumbleator?
Owner/Solder Jockey Bludotone Amp Works
Post Reply