Cabinet Metal Strip
Moderators: pompeiisneaks, Colossal
Cabinet Metal Strip
Where do you guys get that thin polished metal strip that runs under the lip of the front chassis?
- Funkalicousgroove
- Posts: 2235
- Joined: Mon Jul 25, 2005 8:04 pm
- Location: Denver, CO
- Contact:
Re: Cabinet Metal Strip
I have a ton of them, but they are "time saver" sanded, you'll need to polish it yourself. they are cut to 19 1/8" and have the countersunk mounting holes already in them. Send me a PM if you are interested.
Owner/Solder Jockey Bludotone Amp Works
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: Cabinet Metal Strip
I bought mine a home depot in the hardware department.
Hacksawed to length, drill / countersink, pre-polished with 0000 steel wool and final polish with buffering wheel and red rouge compound. Results in a mirror finish. I did the same thing with my tube shields, looks cool as hell.
Gary
Hacksawed to length, drill / countersink, pre-polished with 0000 steel wool and final polish with buffering wheel and red rouge compound. Results in a mirror finish. I did the same thing with my tube shields, looks cool as hell.
Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Re: Cabinet Metal Strip
Thank you very much for the tips.
Funk also gave me a super cool option.
I'll be sure to check it out the next trip to Home Depot.
Funk also gave me a super cool option.
I'll be sure to check it out the next trip to Home Depot.