1/2 watt ok?
Moderators: pompeiisneaks, Colossal
-
- Posts: 1070
- Joined: Thu Apr 24, 2008 2:10 am
- Location: los angeles
1/2 watt ok?
For 12AX7 plate resistors on a 300V PI?
Re: 1/2 watt ok?
If you draw 1mA = 0.001 and Rtypical is 100k...
http://www.ohmcraft.com/technicalinfo/0 ... torial.pdf
W = (0.001)^2*100000
http://www.ohmcraft.com/technicalinfo/0 ... torial.pdf
W = (0.001)^2*100000
Re: 1/2 watt ok?
I use 1/2 watt should be no problem.
The world is a better place just for your smile.
-
- Posts: 1070
- Joined: Thu Apr 24, 2008 2:10 am
- Location: los angeles
Re: 1/2 watt ok?
Thanks. I normally use 1w because the leads are much thicker, but i needed a value i didn't have in a 1w. I will replace it next time i order resistors, thanks.
-
- Posts: 4606
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: 1/2 watt ok?
Over rating on wattage can help to cut down on hiss.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!