(deleted)
Moderators: pompeiisneaks, Colossal
Re: (deleted)
(deleted)
- Leo_Gnardo
- Posts: 2583
- Joined: Thu Sep 27, 2012 1:33 pm
- Location: Dogpatch-on-Hudson
Re: (deleted)
Yikes! I smell trouble. matt wouldn't do such a radical thing without good cause. Lets hope it works out for the best. For now, mystery-of-the-day.Dr-Joned wrote:What's up with deleting all of your posts?
down technical blind alleys . . .
Re: (deleted)
We should not speculate. I have deleted my earlier comment.
Last edited by Phil_S on Fri Mar 27, 2015 6:13 pm, edited 1 time in total.
-
- Posts: 2640
- Joined: Tue Nov 10, 2009 9:55 pm
- Location: Colorado Springs, CO
Re: (deleted)
He's troubled for sure. That has been obvious for quite some time. He deleted 5 out of 1200 posts...that's not erasing a footprint. What happened? He got in a scuffle and wasn't happy about how it turned out. I suspect this is a reaction.
Electronic equipment is designed using facts and mathematics, not opinion and dogma.
-
- Posts: 2640
- Joined: Tue Nov 10, 2009 9:55 pm
- Location: Colorado Springs, CO
Re: (deleted)
Matt, you seem like a nice troubled guy. Get over it, we're all defective in our own way. I do find your narcissistic statement interesting. Stop discussing me and move on. You initiated it by posting and drawing attention to your personal life. Now that it's not convenient, you want it to stop? Dood, lighten up, your particular defect is entertaining.matt h wrote:Instead of suspecting, or guessing, people could have just asked.
I'm deleting everything unless I miss a few, and will be deleting this. Currently, about a thousand posts have been deleted--and this was specifically what was requested.
It's great you all think I'm troubled, thanks for the concern, but it's misplaced.
I'd prefer you just stop discussing this/me and go on with your own business and lives.
Thanks.
Last edited by vibratoking on Fri Mar 27, 2015 4:32 pm, edited 1 time in total.
Electronic equipment is designed using facts and mathematics, not opinion and dogma.
Re: (deleted)
I guess I've missed something...
- randalp3000
- Posts: 667
- Joined: Mon Jan 09, 2012 11:11 pm
- Location: Holland Michigan
- Contact:
Re: (deleted)
matt, I hope all is well and you can some day participate here again. I'll miss your comments.
take care
take care
- Leo_Gnardo
- Posts: 2583
- Joined: Thu Sep 27, 2012 1:33 pm
- Location: Dogpatch-on-Hudson
Re: (deleted)
Dr.Joned started by asking what's wrong, then I figured the legal beagles might be nipping at your heels, maybe you have to go to ground for a while. No negative reflection on you matt! When you've settled down some, feel free to send me a PM, I am worried. Also very puzzled, who here would ask you to delete 1000 posts? You have friends here. You've helped a lot of people. Let us help you, maybe we can.matt h wrote:Instead of suspecting, or guessing, people could have just asked.
I'm deleting everything unless I miss a few, and will be deleting this. Currently, about a thousand posts have been deleted--and this was specifically what was requested.
It's great you all think I'm troubled, thanks for the concern, but it's misplaced.
I'd prefer you just stop discussing this/me and go on with your own business and lives.
Thanks.
down technical blind alleys . . .
- johnnyreece
- Posts: 993
- Joined: Thu Jan 26, 2012 2:05 am
- Location: New Castle, IN
Re: (deleted)
Just gonna chime in with support here. I prefer to send things like this via PM vs. open forum, but this situation seems to warrant it. I wholly agree with Leo here. Hope this is just a temporary blip and we see you back soon.Leo_Gnardo wrote:You have friends here. You've helped a lot of people. Let us help you, maybe we can.
- JazzGuitarGimp
- Posts: 2355
- Joined: Mon Jul 23, 2012 4:54 pm
- Location: Northern CA
Re: (deleted)
Matt was asked to delete the posts in which he got into a shouting match with RG Keen - this was in cbass' post about using MOSFET's in the Fender Harmonic Tremolo circuit. He was not asked to delete everything he has contributed to this forum. He is obviously over-reacting because he is butthurt. I saw the whole thing, and I can attest that RG did nothing to provoke Matt. Nonetheless, Matt felt as though RG 'singled him out and attacked him". IMO, It just amounts to a bit of thin-skinnedness on Matt's part, followed by a huge, overblown misunderstanding.Leo_Gnardo wrote:Dr.Joned started by asking what's wrong, then I figured the legal beagles might be nipping at your heels, maybe you have to go to ground for a while. No negative reflection on you matt! When you've settled down some, feel free to send me a PM, I am worried. Also very puzzled, who here would ask you to delete 1000 posts? You have friends here. You've helped a lot of people. Let us help you, maybe we can.matt h wrote:Instead of suspecting, or guessing, people could have just asked.
I'm deleting everything unless I miss a few, and will be deleting this. Currently, about a thousand posts have been deleted--and this was specifically what was requested.
It's great you all think I'm troubled, thanks for the concern, but it's misplaced.
I'd prefer you just stop discussing this/me and go on with your own business and lives.
Thanks.
Lou Rossi Designs
Printed Circuit Design & Layout,
and Schematic Capture
Printed Circuit Design & Layout,
and Schematic Capture
Re: (deleted)
I don't think there was any misunderstanding on my part . I thought I was pretty clear.JazzGuitarGimp wrote:followed by a huge, overblown misunderstanding.
- JazzGuitarGimp
- Posts: 2355
- Joined: Mon Jul 23, 2012 4:54 pm
- Location: Northern CA
Re: (deleted)
No doubt, cbass. My statement referred to the exchange between matt h and RG Keen.cbass wrote:I don't think there was any misunderstanding on my part . I thought I was pretty clear.JazzGuitarGimp wrote:followed by a huge, overblown misunderstanding.
Lou Rossi Designs
Printed Circuit Design & Layout,
and Schematic Capture
Printed Circuit Design & Layout,
and Schematic Capture
Re: (deleted)
Geez I get busy for a couple weeks and this is what I find.
Matt I am very sorry you feel it necessary to do this. If you had an issue with one or two people you are taking it out on all of us which is unfair.
That said, many people that have contributed to this site have left for various reasons and this site will continue just the same. Good Luck in your endeavors!
Matt I am very sorry you feel it necessary to do this. If you had an issue with one or two people you are taking it out on all of us which is unfair.
That said, many people that have contributed to this site have left for various reasons and this site will continue just the same. Good Luck in your endeavors!