This is a fun one I just started today. Hope to finish by the end of the week.
[img2448]http://i.imgur.com/CbndxNf.jpg[/img]
[img2448]http://i.imgur.com/crfzHbN.jpg[/img]
[img2448]http://i.imgur.com/5jHUUQh.jpg[/img]
[img2448]http://i.imgur.com/VtJvTZV.jpg[/img]
Muchless Spit Build
Moderators: pompeiisneaks, Colossal
-
- Posts: 478
- Joined: Thu Nov 01, 2007 4:42 am
- Location: Southern California
Muchless Spit Build
Learning to learn...
Re: Muchless Spit Build
The Matchless Spitfire is a good circuit and I used one for gigging for several years. To cut through the mix I simply relied on my pedal board effects to help me through.
The fat switch doesn't have much apparent effect.
Have fun.
Mark
The fat switch doesn't have much apparent effect.
Have fun.
Mark
Re: Muchless Spit Build
Nice!
Very tidy Merlin style heater wiring.
What chassis is it (I assume you haven't done those cut outs for the transformers)?
Very tidy Merlin style heater wiring.
What chassis is it (I assume you haven't done those cut outs for the transformers)?
My band:- http://www.youtube.com/user/RedwingBand
-
- Posts: 478
- Joined: Thu Nov 01, 2007 4:42 am
- Location: Southern California
Re: Muchless Spit Build
Amp is done and it came out really well:
[img2448]http://i.imgur.com/NLLvlTH.jpg[/img]
[img2448]http://i.imgur.com/aCG64xJ.jpg[/img]
[img2448]http://i.imgur.com/xXxNEx6.jpg[/img]
https://www.youtube.com/watch?v=WVKYCdigKkc
[img2448]http://i.imgur.com/NLLvlTH.jpg[/img]
[img2448]http://i.imgur.com/aCG64xJ.jpg[/img]
[img2448]http://i.imgur.com/xXxNEx6.jpg[/img]
https://www.youtube.com/watch?v=WVKYCdigKkc
Learning to learn...
Re: Muchless Spit Build
fusionbear: nice job and it sounds awesome!
from your pictures on your version of the PPMIV I don't see the usual 2M
resistors across the lugs, how did you wire that up?
I see lug 1 to ground and ??
I want to build a Spitfire and maybe add an EF86 channel
and employ your MV
I also listening to your 1986 Plexi Build video....Wow
thanks in advance, Joe
from your pictures on your version of the PPMIV I don't see the usual 2M
resistors across the lugs, how did you wire that up?
I see lug 1 to ground and ??
I want to build a Spitfire and maybe add an EF86 channel
and employ your MV
I also listening to your 1986 Plexi Build video....Wow
thanks in advance, Joe
-
- Posts: 478
- Joined: Thu Nov 01, 2007 4:42 am
- Location: Southern California
Re: Muchless Spit Build
One lug goes to ground and the other goes to the input of the power tubes. There is always a 250k reference to ground for the screens. No need to use extra resistors. The wiper is the input.joeboo88 wrote:fusionbear: nice job and it sounds awesome!
from your pictures on your version of the PPMIV I don't see the usual 2M
resistors across the lugs, how did you wire that up?
I see lug 1 to ground and ??
I want to build a Spitfire and maybe add an EF86 channel
and employ your MV
I also listening to your 1986 Plexi Build video....Wow
thanks in advance, Joe
Learning to learn...