Blackface Deluxe Reverb build
Moderators: pompeiisneaks, Colossal
Blackface Deluxe Reverb build
Single channel BF Deluxe Reverb with mid pot.
Using blank Princeton Reverb chassis from Seaside Amps, custom Mojotone faceplate with middle pot added and my cabinet builders name. (I pleasantly surprised him) with the monogram.
I will post transformer info on next post with photos of that process.
Mark
Using blank Princeton Reverb chassis from Seaside Amps, custom Mojotone faceplate with middle pot added and my cabinet builders name. (I pleasantly surprised him) with the monogram.
I will post transformer info on next post with photos of that process.
Mark
You do not have the required permissions to view the files attached to this post.
Re: Blackface Deluxe Reverb build
I like what you did around the input jacks (exposed white rings in the faceplate). I'm stealin' ur shit.
Very cool, carry on.
Very cool, carry on.
I build and repair tube amps. http://amps.monkeymatic.com
Re: Blackface Deluxe Reverb build
that looks really Purdy, cant wait to see more....
Re: Blackface Deluxe Reverb build
Drilled holes for transformers and bolted them on.
Attached board and starting to wire.
Attached board and starting to wire.
You do not have the required permissions to view the files attached to this post.
Re: Blackface Deluxe Reverb build
Man I hate wiring Fender boards, too much x,y and z for me.
Finished her up this morning. Non-traditional single channel Deluxe Reverb with mid pot 25kL added.
It sounds good to my ears, ready for pickup.
Finished her up this morning. Non-traditional single channel Deluxe Reverb with mid pot 25kL added.
It sounds good to my ears, ready for pickup.
You do not have the required permissions to view the files attached to this post.
Re: Blackface Deluxe Reverb build
Nice job Mark, bet it rocks.
Re: Blackface Deluxe Reverb build
Thanks brother.
I did use different transformer meant for a Tweed Deluxe not Blackface Deluxe so I think it has more balls then a standard BF Deluxe. The OT is 6k.
Bias is 18-19mA range. 450vdc plates.
Owner is building his own combo cab so I will post when I see that.
Mark
I did use different transformer meant for a Tweed Deluxe not Blackface Deluxe so I think it has more balls then a standard BF Deluxe. The OT is 6k.
Bias is 18-19mA range. 450vdc plates.
Owner is building his own combo cab so I will post when I see that.
Mark
-
- Posts: 1378
- Joined: Wed Jun 11, 2008 6:56 pm
- Location: Arizona Desert
Re: Blackface Deluxe Reverb build
Nice build Mark
ground jack for a pedal based boost?
D
ground jack for a pedal based boost?
D
-
- Posts: 895
- Joined: Mon May 24, 2010 11:29 pm
- Location: Bellingham, WA.
- Contact:
Re: Blackface Deluxe Reverb build
Looks great Mark. Lotta wires in a small space on those things.
- martin manning
- Posts: 13555
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: Blackface Deluxe Reverb build
Looks great Mark! I really need to do a DR clone at some point... Lotta stuff in an AB763 circuit for sure.
Re: Blackface Deluxe Reverb build
Thanks guys it sounds very good and went home this afternoon.
I should have labelled that ground hole as the bias pot.
I should have labelled that ground hole as the bias pot.
- dorrisant
- Posts: 2689
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: Blackface Deluxe Reverb build
Nice build as usual
Does anyone have a source for 1:1 layouts for Fender circuits?
I have some RI chassis that could stand to loose PCBs in favor of the old layouts.
Does anyone have a source for 1:1 layouts for Fender circuits?
I have some RI chassis that could stand to loose PCBs in favor of the old layouts.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: Blackface Deluxe Reverb build
Hoffman blows up the fender board layout and makes garolite boards from them. Watts tube audio also.
I used the black board that came with my small parts kit from Mojotone as a template to drill this blue board.
I used the black board that came with my small parts kit from Mojotone as a template to drill this blue board.
- dorrisant
- Posts: 2689
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: Blackface Deluxe Reverb build
Thanks Mark...I will check those out. I knew I had seen something like that, just couldn't remember where.
"Education is what you're left with after you have forgotten what you have learned" - Enzo
Re: Blackface Deluxe Reverb build
Just received some cab photos from the owner, he wanted to build a pine cab and his work looks good.
You do not have the required permissions to view the files attached to this post.