Hey everyone,
I am still quite new to electronic's but I really want to learn how audio works but I must say that I haven't gotten that far yet by just watching youtube videos. I really want to learn it since I want to be able to repair and build amplifiers and maybe even repair and modify mixers since I'm trying to become a sound engineer. So my question to you guys is, is there anyone willing to be a mentor to me? Preferably someone in the EU since then the timezone's won't be a problem. I'm currently 16 so I do still have to go to school. Also it would help a lot if the person would have skype or discord or any other type of voice communication since then I can ask my dumb questions directly. I get that this is not for everyone and maybe not even anyone but I would really appreciate it!
Thanks and regards,
Tom
Searching for a mentor
Moderators: pompeiisneaks, Colossal
- pompeiisneaks
- Site Admin
- Posts: 4228
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
Re: Searching for a mentor
I definitely am too far away, but this is really the right way to go about it. Hopefully someone can help. Learning from someone's direct experience is almost always the best imo. OJT, On the Job Training.
~Phil
~Phil
tUber Nerd!
- martin manning
- Posts: 13549
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: Searching for a mentor
Tom, there is a lot of fantastic stuff on You Tube, but don't overlook "print" sites offering basic electronics info. Here's a good one: https://www.electronics-tutorials.ws
Learning this stuff is a never-ending process that begins with understanding the basics and continuously building on them. Start by getting a good grasp of DC circuits, and go where your interest takes you. When you encounter a concept you don't understand, go find some material that covers that piece. You can certainly ask questions here too.
Learning this stuff is a never-ending process that begins with understanding the basics and continuously building on them. Start by getting a good grasp of DC circuits, and go where your interest takes you. When you encounter a concept you don't understand, go find some material that covers that piece. You can certainly ask questions here too.
- Tony Bones
- Posts: 228
- Joined: Thu Oct 30, 2014 8:24 pm
Re: Searching for a mentor
As Martin said, don't ignore printed material. You can spend years reading the stuff at http://www.tubebooks.org/ Thanks Pete Millett!) I first learned how vacuum tubes worked by reading the first 100 pages or so in an early 60's RCA Receiving Tube Manual.
And, don't be afraid to ask questions here at TAG.
And, don't be afraid to ask questions here at TAG.
Re: Searching for a mentor
Thanks for the tip about the reading material, I will definitely use it! But if there is anyone available I'd really like to ask questions and talk about some stuff trough voice chat too!
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
Re: Searching for a mentor
Tom,
I think 'modern/current' equipment used in the live sound field is pretty much non repairable albeit for replacing a board here or there as everything is now digital.
I've learned how to make tube amps from being an active member here over the last 4 or 5 years but that knowledge and skillset ends with modern class D/digital equipment.
I've no idea what a current 'electronics' course would mean
as already pointed out learn the basics from you tube/books etc there's more imformation easily available now than ever before. I've learned so much from you tube, there;s some great people out there sharing their knowlege.
I'd certainly learn how to solder, get an iron and make some cables, that's a skill that will always be useful on the road/live and I've found power supplies in all kinds of things are usually the first things to go so being able to solder in a new capacitor can be a cheap fix. IN the last few years I've saved my Washing machine, a Samsung computer monitor and the pump on my cenrtal heating boiler just by replacing worn out electrolytic capacitors
I have a very busy life so don't have the time I'm afraid and more importantly I don't have a good enough knowledge to be a good teacher I this subject but I'm sure if you're really interested you'll find a way to reach your goals one way or another.
good luck and welcome to the forum.
Marcus
I think 'modern/current' equipment used in the live sound field is pretty much non repairable albeit for replacing a board here or there as everything is now digital.
I've learned how to make tube amps from being an active member here over the last 4 or 5 years but that knowledge and skillset ends with modern class D/digital equipment.
I've no idea what a current 'electronics' course would mean
as already pointed out learn the basics from you tube/books etc there's more imformation easily available now than ever before. I've learned so much from you tube, there;s some great people out there sharing their knowlege.
I'd certainly learn how to solder, get an iron and make some cables, that's a skill that will always be useful on the road/live and I've found power supplies in all kinds of things are usually the first things to go so being able to solder in a new capacitor can be a cheap fix. IN the last few years I've saved my Washing machine, a Samsung computer monitor and the pump on my cenrtal heating boiler just by replacing worn out electrolytic capacitors
I have a very busy life so don't have the time I'm afraid and more importantly I don't have a good enough knowledge to be a good teacher I this subject but I'm sure if you're really interested you'll find a way to reach your goals one way or another.
good luck and welcome to the forum.
Marcus
Re: Searching for a mentor
You might also find this helpful:
https://masteryourtest.com/study/
Here's some relevant youtube channels that I subscribe to you may find helpful, some technical, some just about general music/recording:
https://www.youtube.com/channel/UCU9SoQ ... _3GxeteQPA
https://www.youtube.com/channel/UCS0N5b ... UrhCEo8WlA
https://www.youtube.com/channel/UC0IY1B ... vezqWLyk4g
https://www.youtube.com/channel/UCuR4hQ ... ozLxwPzEjQ
https://www.youtube.com/channel/UCMh66L ... BpN2N5RZuA
https://www.youtube.com/channel/UCJquYO ... KTfH9aMA9Q
https://www.youtube.com/channel/UCyaStg ... 1PgH8bUkzg
Also throwing in This Old Tony, his videos are centered around machining and metal work, some of which might be helpful if you decided to make your own chassis. But I mainly linked him because he gives a lot of insight into what goes into making and manufacturing things in general. Also he's ridiculously entertaining, even if the subject matter isn't really your thing.
https://www.youtube.com/channel/UC5NO8M ... Xp6z8Xl7yQ
https://masteryourtest.com/study/
Here's some relevant youtube channels that I subscribe to you may find helpful, some technical, some just about general music/recording:
https://www.youtube.com/channel/UCU9SoQ ... _3GxeteQPA
https://www.youtube.com/channel/UCS0N5b ... UrhCEo8WlA
https://www.youtube.com/channel/UC0IY1B ... vezqWLyk4g
https://www.youtube.com/channel/UCuR4hQ ... ozLxwPzEjQ
https://www.youtube.com/channel/UCMh66L ... BpN2N5RZuA
https://www.youtube.com/channel/UCJquYO ... KTfH9aMA9Q
https://www.youtube.com/channel/UCyaStg ... 1PgH8bUkzg
Also throwing in This Old Tony, his videos are centered around machining and metal work, some of which might be helpful if you decided to make your own chassis. But I mainly linked him because he gives a lot of insight into what goes into making and manufacturing things in general. Also he's ridiculously entertaining, even if the subject matter isn't really your thing.
https://www.youtube.com/channel/UC5NO8M ... Xp6z8Xl7yQ
- pompeiisneaks
- Site Admin
- Posts: 4228
- Joined: Sat Jan 14, 2017 4:36 pm
- Location: Washington State, USA
- Contact:
Re: Searching for a mentor
Great list, I'll add another of my favorites, it's about machining mostly but some electronics as well, AvE: https://www.youtube.com/channel/UChWv6P ... 6lgGt3MyfAstrelok wrote: ↑Thu Jan 31, 2019 10:27 am You might also find this helpful:
https://masteryourtest.com/study/
Here's some relevant youtube channels that I subscribe to you may find helpful, some technical, some just about general music/recording:
https://www.youtube.com/channel/UCU9SoQ ... _3GxeteQPA
https://www.youtube.com/channel/UCS0N5b ... UrhCEo8WlA
https://www.youtube.com/channel/UC0IY1B ... vezqWLyk4g
https://www.youtube.com/channel/UCuR4hQ ... ozLxwPzEjQ
https://www.youtube.com/channel/UCMh66L ... BpN2N5RZuA
https://www.youtube.com/channel/UCJquYO ... KTfH9aMA9Q
https://www.youtube.com/channel/UCyaStg ... 1PgH8bUkzg
Also throwing in This Old Tony, his videos are centered around machining and metal work, some of which might be helpful if you decided to make your own chassis. But I mainly linked him because he gives a lot of insight into what goes into making and manufacturing things in general. Also he's ridiculously entertaining, even if the subject matter isn't really your thing.
https://www.youtube.com/channel/UC5NO8M ... Xp6z8Xl7yQ
his stuff is downright hilarious. A crazy canuck from just up north of me in BC.
~Phil
tUber Nerd!