The dilithium crystal on the left transponder seems to be out of calibration.
Translation:
Looks good man!:lol:
Clips?
EF86 internal shield
Moderators: pompeiisneaks, Colossal
Re: EF86 internal shield
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: EF86 internal shield
Thanks Tom, I hope she doesn't blow like Scotty always said!
Working on getting clips recorded for all my builds by my friend Steve when we get the first opportunity which will probably be in the winter time in Minnesota for sure ya know.
Mark
Working on getting clips recorded for all my builds by my friend Steve when we get the first opportunity which will probably be in the winter time in Minnesota for sure ya know.
Mark
Re: EF86 internal shield
It looks good. Curious...Did you end up changing the PT?
Re: EF86 internal shield
FunkyE9th thanks I did not change the PT but I do plan to at some time this winter. So that I can have bias tap and change OT with ultra linear taps. I want this JTM tranny set for a Marshall build and for the Root 666 to have the correct circuit. I did like people said build it and play with and later change it out, has been a good experience and fun.
Mark
Mark
Re: EF86 internal shield
i also have a RT clone is there any difference between a 0.1u coupling cap and 0.15u, i have two different schems showing two different values (ie. they are the two caps coming off the PI, thanks