Issues with new JTM45 build
Moderators: pompeiisneaks, Colossal
Re: Issues with new JTM45 build
That drawing for the input jacks is not correct. Look at this pic. The two violet wires go to the 68K resistors. Green wire goes to ground.
You do not have the required permissions to view the files attached to this post.
Re: Issues with new JTM45 build
Thanks a million sluckey!!
Joe
Joe
Re: Issues with new JTM45 build
I forgot to mention but the speaker jacks in that drawing are incorrect also. Whoever drew those two drawings made the same mistake. The switch terminals and the tip and sleeve terminals are reversed.
Re: Issues with new JTM45 build
Thanks for confirming that.
Joe
Joe