The #124 build

[timrobertson100]

Deleted (had a typo with the wrong part number, corrected by Martin in next post)

[martin manning]

While we there, Switchcraft 12A good for the fx loop and speaker outs? Whey aren't the stereo type, right? I will be using 13E for the FET

13E works fine for the FET, in the TAG eyelet board schematic the connections are consistent with 14B See: https://ampgarage.com/forum/viewtopic.p ... 28#p104228
11 for the loop send and extension speaker
12A for the normal input, main speaker out, and loop return

[pottedplant]

Making slow progress, this is the first version of my layout. I still have to double-check the connections and clean up the wiring, ensuring that AC, audio and high current are not too close to each other.

This surprised me, nice layout I was not expecting to see that!

Thank you... I think.

Early stage, things most likely get moved later

i've got lots of respect for that kind of build! i have no clue about it all and it looks so tidy!

[Turret]

While we there, Switchcraft 12A good for the fx loop and speaker outs? Whey aren't the stereo type, right? I will be using 13E for the FET

13E works fine for the FET, in the TAG eyelet board schematic the connections are consistent with 14B See: https://ampgarage.com/forum/viewtopic.p ... 28#p104228
11 for the loop send and extension speaker
12A for the normal input, main speaker out, and loop return

Martin, just like every time; you are a legend!

This surprised me, nice layout I was not expecting to see that!

Thank you... I think.

Early stage, things most likely get moved later

i've got lots of respect for that kind of build! i have no clue about it all and it looks so tidy!

You're being way too nice. It's not a big revelation to say that I have no clue either. As I mentioned earlier in the thread, I had a long break from DIY projects; I tend to become obsessive about this stuff. The good thing is that I have a keen attention to detail. However, the downside is that I often drive myself, and everyone around me, crazy. You can see this in the thread, like with my question about the output jack, for example. Anyway, here are my current plans; I've deleted the old ones. Please take these as a work in progress. No more updates for the next couple of days, as I'm work busy.

[Turret]

I have just bought the chassis from Amplified Nation, so we can assume I'm officially game on